( Invited ) Designing Solid Electrolytes and Cathodes for All Solid Batteries
ECS Meeting Abstracts · 07.07.2026 · MA2026-01 (4) · 550-550
DOI: 10.1149/ma2026-014550mtgabs ↗Kurz gefasst
Fachartikel in der Zeitschrift ECS Meeting Abstracts, erschienen am 07.07.2026. Verfasst von Jay Hyok Song und 5 weiteren Autor:innen.
Abstract (Originalsprache)
Demands for safe energy storage devices have grown rapidly, which has driven a vast investigation in all solid batteries (ASBs) due to their high safety and specific energy. Plenty of works were carried out to develop solid electrolytes (SEs) with high ionic conductivity and mechanical softness. Among them, argyrodite-type SEs exhibit comparable ionic conductivity with those of liquid electrolytes, exceeding 10 mS/cm. In addition, their softness allows the production of a SE layer by a pressing process. Conventional layered oxides have been considered the most promising cathode candidates for ASBs due to their high specific capacity and electrode density. However, intrinsic drawbacks of argyrodite and layered cathode must be addressed for the commercial use of ASBs. The high fabrication cost of argyrodite also needs to be taken into account. In this research, a new argyrodite composition and a compatible cathode material were developed to enhance the performance of all-solid-state batteries. Li 5.72 M x PS 4.75 Cl 1.25 shows enhanced chemical stability along with high ionic conductivity. To reduce the fabrication cost of solid electrolytes, new synthesis routes for lithium sulfide (Li₂S), the precursor of argyrodite, were also investigated. High-Ni cathode was prepared for higher energy density of ASBs. The Ni content was optimized by considering the volume change and the reversible capacity. It was concluded that the high-Ni cathode (LiNi 0.94 M x O 2 ) is suitable for ASBs. The effects of a protective layer coating on cell capacity, rate capability, and cycle life were also investigated. These material-development approaches can be widely implemented to enable the commercialization of low-cost and high-performance ASBs.
Zitieren
APA
Song, J. H., Lee, K., Heo, E., Yang, H., Yun, P., & Kim, Y. (2026). ( Invited ) Designing Solid Electrolytes and Cathodes for All Solid Batteries. ECS Meeting Abstracts, MA2026-01(4), 550-550. https://doi.org/10.1149/ma2026-014550mtgabs
Vancouver
Song JH, Lee K, Heo E, Yang H, Yun P, Kim Y. ( Invited ) Designing Solid Electrolytes and Cathodes for All Solid Batteries. ECS Meeting Abstracts. 2026;MA2026-01(4):550-550. doi:10.1149/ma2026-014550mtgabs
BibTeX
@article{Song2026,
author = {Song, Jay Hyok and Lee, Kyulin and Heo, Eunseok and Yang, Hwichul and Yun, PilSang and Kim, Yongseok},
title = {( Invited ) Designing Solid Electrolytes and Cathodes for All Solid Batteries},
journal = {ECS Meeting Abstracts},
year = {2026},
volume = {MA2026-01},
number = {4},
pages = {550--550},
doi = {10.1149/ma2026-014550mtgabs}
}
EUVIMED