EUVIMEDEUVIMED entdecken
Crossref

Design of Tailored Surface Compositions on Single-Crystalline Layered Transition Metal Oxide Cathode Active Materials

Carlo Robert Tomuschat, Tim Kipfer, Rebecca Wilhelm, Maike Wirtz, Michele Piana, Hubert Andreas Gasteiger

ECS Meeting Abstracts · 07.07.2026 · MA2026-01 (3) · 486-486

DOI: 10.1149/ma2026-013486mtgabs ↗

Kurz gefasst

Fachartikel in der Zeitschrift ECS Meeting Abstracts, erschienen am 07.07.2026. Verfasst von Carlo Robert Tomuschat und 5 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The choice of cathode active material (CAM) is a key differentiator for battery performance. NCM-type layered transition metal oxide CAMs with very high Ni content (LiNi x Co y Mn z O 2 , with x + y + z = 1 and x ≥ 0.9) are known to provide a high energy density in Li-ion batteries. 1 However, their application can be challenging because of structural instabilities during cycling, which can limit the lifetime of Li-ion cells employing such ultra-Ni-rich CAMs. 2 The use of single-crystalline CAMs emerged as a promising mitigation strategy to stabilize this material class, 3 as the change in morphology can reduce their chemo-mechanical degradation (“particle cracking”) upon cycling. 4 The cracking of polycrystalline CAMs exposes internal CAM surfaces to the electrolyte, so that protective surface coatings 5 applied to polycrystalline CAM particles are less effective. On the other hand, owing to the superior mechanical stability of single-crystalline CAMs, they offer the opportunity to engineer particle coatings that retain their integrity and quasi-complete CAM particle coverage upon cycling, so that the surface modification of single-crystalline CAMs can be a more effective way to stabilize the CAM/electrolyte interface. While a plethora of effective surface modification processes have been identified, 5 possible further improvements by optimized synthesis conditions are often overlooked. The surface modification process may enhance electrochemical performance characteristics; however, the function of any coating or surface doping is highly dependent on a broad variety of underexplored synthesis parameters. 6 Additionally, the accurate structural description of the modified surface, necessary to establish valuable synthesis-structure-performance relationships, is challenging. Here, we present a series of single-crystalline, surface-modified CAMs with tailored surface compositions, derived from a newly established protocol based on X-ray photoelectron spectroscopy. Starting from LiNiO 2 as a model material for ultra-Ni-rich CAMs, we study the compositional evolution of the CAM surface during its modification process, as a function of the coating preparation process. It will be shown that the composition of the CAM particle surface strongly affects the electrochemical properties of the CAMs, specifically their specific capacity, rate capability, and long-term cycling stability in CAM//graphite full-cells. The unified synthetic approach, combined with a systematic variation of the coating preparation procedures, provides detailed insights into how even small changes in synthesis parameters can significantly impact the properties of CAMs. References M. Jiang, D. L. Danilov, R. Eichel, and P. H. L. Notten, Adv. Energy Mater. , 11 , 2103005 (2021). J.-H. Kim, H.-H. Ryu, S. J. Kim, C. S. Yoon, and Y.-K. Sun, ACS Appl. Mater. Interfaces , 11 , 30936–30942 (2019). G.-T. Park, H.-H. Ryu, N.-Y. Park, S.-B. Lee, and Y.-K. Sun, Chem. Rev. , 125 , 9930–10000 (2025). S. Oswald, M. Bock, and H. A. Gasteiger, J. Electrochem. Soc. , 170 , 090505 (2023). D. Weber, Đ. Tripković, K. Kretschmer, M. Bianchini, and T. Brezesinski, Eur. J. Inorg. Chem. , 2020 , 3117–3130 (2020). M. Kissel, F. Walther, J. Hertle, T. Demuth, R. Zhang, P. Brüner, T. Brezesinski, K. Volz, and J. Janek, Chem. Mater. , 37 , 2192–2203 (2025). Acknowledgement This work is financially supported by BASF SE.

Zitieren

APA

Tomuschat, C. R., Kipfer, T., Wilhelm, R., Wirtz, M., Piana, M., & Gasteiger, H. A. (2026). Design of Tailored Surface Compositions on Single-Crystalline Layered Transition Metal Oxide Cathode Active Materials. ECS Meeting Abstracts, MA2026-01(3), 486-486. https://doi.org/10.1149/ma2026-013486mtgabs

Vancouver

Tomuschat CR, Kipfer T, Wilhelm R, Wirtz M, Piana M, Gasteiger HA. Design of Tailored Surface Compositions on Single-Crystalline Layered Transition Metal Oxide Cathode Active Materials. ECS Meeting Abstracts. 2026;MA2026-01(3):486-486. doi:10.1149/ma2026-013486mtgabs

BibTeX
@article{Tomuschat2026,
  author = {Tomuschat, Carlo Robert and Kipfer, Tim and Wilhelm, Rebecca and Wirtz, Maike and Piana, Michele and Gasteiger, Hubert Andreas},
  title = {Design of Tailored Surface Compositions on Single-Crystalline Layered Transition Metal Oxide Cathode Active Materials},
  journal = {ECS Meeting Abstracts},
  year = {2026},
  volume = {MA2026-01},
  number = {3},
  pages = {486--486},
  doi = {10.1149/ma2026-013486mtgabs}
}
Kostenlos starten →