( Invited ) Lithium-Sulfur Battery Technologies and Progress at Lyten Towards Commercialization
ECS Meeting Abstracts · 07.07.2026 · MA2026-01 (3) · 271-271
DOI: 10.1149/ma2026-013271mtgabs ↗Kurz gefasst
Fachartikel in der Zeitschrift ECS Meeting Abstracts, erschienen am 07.07.2026. Verfasst von Ratnakumar Bugga.
Abstract (Originalsprache)
Lithium-sulfur system is probably foremost of the sustainable next-generation battery technologies with its many advantages including high specific energy, low cost, safety, abundant raw materials that are not plagued by supply chain issues or cost uncertainties, and low carbon footprint. Yet, their implementation in practical devices has been challenging, despite impressive results in academic environment, deterred mainly by the ‘polysulfide shuttle’ – a phenomenon attributed to the dissolution of lithium polysulfide intermediates in electrolyte. To address this, two different strategies are being pursued at the industrial level, which are: i) Conventional sulfur cathode with novel cathode designs and new electrolytes that can reduce the polysulfide shuttle effects and ii) Sulfurized polymers with sulfur inorganically bonded to a polymeric chain, e.g., Sulfurized Polyacrylonitrile (SPAN). While higher specific energies are possible in the first option, a relatively better cycle life but at reduced specific energy (due to. lower sulfur capacity and voltage) are expected from the second option. Additionally, in more academically oriented studies, sulfur allotropes which undergo reduction without polysulfide intermediates e.g., monoclinic or gamma sulfur are being investigated. Finally, solid state Li-S cells look promising to offer longer cycle life combined with high specific energy but require further development. A brief review of these different Li-S technologies will be presented, while touching upon Lyten’s progress towards commercialization of the conventional Li-S batteries for drones and UAVs. Lyten’s Li-S technology is based on its unique 3D Graphene (3DG) carbons, produced from the cracking of hydrocarbons, with hierarchical porous structure which can mitigate shuttle effects by an entrapment of polysulfides by physisorption. With its well-engineered pore structure with controlled nano/micro/meso pores providing high pore volume, Lyten 3D graphene can accommodate high proportions of sulfur and can improve retention of polysulfide intermediates during cycling by physisorption. Lyten combines the cathodes made from the 3d graphene-sulfur cathode active material using aqueous binders, with novel Li composite anodes in 3D architectures and advanced stable and sparingly solvating electrolytes. Lyten is producing Li-S cells of 10 Ah, which show specific energies of 300-345 Wh/kg and cycle life up to 400 cycles at C/3 and 100% depth of discharge (DOD), but with longer cycle life at partial depth of discharge, i.e., > 1000 cycles at 30-40% DOD, and over 3000 cycles at 20% DOD in LEO (Low Earth Orbit) satellite tests.
Zitieren
APA
Bugga, R. (2026). ( Invited ) Lithium-Sulfur Battery Technologies and Progress at Lyten Towards Commercialization. ECS Meeting Abstracts, MA2026-01(3), 271-271. https://doi.org/10.1149/ma2026-013271mtgabs
Vancouver
Bugga R. ( Invited ) Lithium-Sulfur Battery Technologies and Progress at Lyten Towards Commercialization. ECS Meeting Abstracts. 2026;MA2026-01(3):271-271. doi:10.1149/ma2026-013271mtgabs
BibTeX
@article{Bugga2026,
author = {Bugga, Ratnakumar},
title = {( Invited ) Lithium-Sulfur Battery Technologies and Progress at Lyten Towards Commercialization},
journal = {ECS Meeting Abstracts},
year = {2026},
volume = {MA2026-01},
number = {3},
pages = {271--271},
doi = {10.1149/ma2026-013271mtgabs}
}
EUVIMED