EUVIMEDEUVIMED entdecken
Crossref

( Invited ) The Rechargeable Lithium-Air Battery - Recent Progress and the Cathode Challenge

Xiangwen Gao, Sunyhik Ahn, Max Jenkins, Ceren Zor, Chloe Chau, Sixie Yang, Daniel Dewar, Tammy Nimmo, Gregory Rees, Jack Jordan, Kieran D Jones, Lee R Johnson und 1 weitere

ECS Meeting Abstracts · 07.07.2026 · MA2026-01 (4) · 545-545

DOI: 10.1149/ma2026-014545mtgabs ↗

Kurz gefasst

Fachartikel in der Zeitschrift ECS Meeting Abstracts, erschienen am 07.07.2026. Verfasst von Xiangwen Gao und 12 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The rechargeable Li-air battery has a very high theoretical specific (gravimetric) energy density, 3500 Wh kg -1 , making it of interest for the electrification of aviation. Based on recent progress, and if the remaining challenges can be met, modelling has shown that a 100 kWh battery, including the air handling, could deliver 600 Wh kg -1 or more. The Li-air battery requires a Li metal electrode protected from the liquid electrolyte by a solid electrolyte membrane. Such a protected Li anode is desirable for other batteries, e.g. Li-S or replacing graphite in Li-ion; it is being studied intensively. However, here we shall focus on the unique aspect of the Li-air cell, namely the air electrode and its operation. The overall cathode reaction is: O 2 + 2e - + 2Li + = Li 2 O 2 In a typical cell, O 2 from the air enters the porous carbon cathode (that is flooded with electrolyte) and is reduced to Li 2 O 2 on discharge and the latter oxidized again on charge, releasing O 2 . Li 2 O 2 is an insulating solid and can passivate the surfaces of the electrode. The introduction of redox mediating molecules (e.g. quinones) that are reduced at the surfaces of the porous electrode and then reduce O 2 in solution within the pores, avoids surface passivation. Oxidation mediators then facilitate charging, Figure 1. By combining this strategy with a new porous carbon cathode in which we incorporate polymers that enable rapid O 2 transport through the cathode, our cells can deliver areal capacities on discharge of more than 20 mAh cm -2 at a rate of 1-2 mA cm -2 . Degradation, leading to capacity fade on cycling, represents arguably the greatest challenge. We have shown recently that this does not arise principally from attack by singlet O 2 ( 1 O 2 ), as widely believed. We have identified the primary source of degradation and associated loss of Li 2 O 2 , enabling strategies to reduce Li 2 O 2 loss and degradation significantly. Furthermore, we have shown that up to 9 M H 2 O, equivalent to 20% humidity in the inlet gas stream, can not only be tolerated but is in fact beneficial. Therefore, very dry inlet gas is not required, simplifying air handling. Recent progress in achieving high capacity cathodes, boosting O 2 transport, understanding and mitigating degradation and Li 2 O 2 loss will be discussed. Figure 1

Zitieren

APA

Gao, X., Ahn, S., Jenkins, M., Zor, C., Chau, C., Yang, S., Dewar, D., Nimmo, T., Rees, G., Jordan, J., Jones, K. D., Johnson, L. R., & Bruce, P. G. (2026). ( Invited ) The Rechargeable Lithium-Air Battery - Recent Progress and the Cathode Challenge. ECS Meeting Abstracts, MA2026-01(4), 545-545. https://doi.org/10.1149/ma2026-014545mtgabs

Vancouver

Gao X, Ahn S, Jenkins M, Zor C, Chau C, Yang S, et al. ( Invited ) The Rechargeable Lithium-Air Battery - Recent Progress and the Cathode Challenge. ECS Meeting Abstracts. 2026;MA2026-01(4):545-545. doi:10.1149/ma2026-014545mtgabs

BibTeX
@article{Gao2026,
  author = {Gao, Xiangwen and Ahn, Sunyhik and Jenkins, Max and Zor, Ceren and Chau, Chloe and Yang, Sixie and Dewar, Daniel and Nimmo, Tammy and Rees, Gregory and Jordan, Jack and Jones, Kieran D and Johnson, Lee R and Bruce, Peter G.},
  title = {( Invited ) The Rechargeable Lithium-Air Battery - Recent Progress and the Cathode Challenge},
  journal = {ECS Meeting Abstracts},
  year = {2026},
  volume = {MA2026-01},
  number = {4},
  pages = {545--545},
  doi = {10.1149/ma2026-014545mtgabs}
}
Kostenlos starten →