EUVIMEDEUVIMED entdecken
Crossref

Polyolefin–Wax Binder Enables High-Safety Dry-Processed Graphite Electrode

Myunggeun Song, Junhyeok Choi, Seungyeop Choi, Yong Min Lee

ECS Meeting Abstracts · 07.07.2026 · MA2026-01 (2) · 152-152

DOI: 10.1149/ma2026-012152mtgabs ↗

Kurz gefasst

Fachartikel in der Zeitschrift ECS Meeting Abstracts, erschienen am 07.07.2026. Verfasst von Myunggeun Song und 3 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Dry electrode technology offers a sustainable pathway to reduce process energy and operating expenses (OPEX) in the absence of the electrode drying step. Despite these advantages, polytetrafluoroethylene (PTFE) binders possessing fibrillar structures exhibit poor electrochemical stability at low potentials (≈ 0.6 V vs Li/Li + ), thereby limiting their applicability as anode binders. Crucially, we uncovered a new safety limitation associated with PTFE, demonstrating that it poses significant fire and explosion risks even within an argon-filled glovebox. These hazards arise from impact-induced chain defluorination when PTFE is in direct contact with lithium metal. To overcome these issues, we introduced polyolefin–wax as a novel binder for dry anodes. polyolefin–wax provides superior interfacial adhesion even under room-temperature calendering conditions and offers enhanced electrolyte affinity compared to PTFE. As a result, polyolefin–wax-based cells exhibited improved cycle life, achieving a discharge capacity retention of 85.3% after 400 cycles (83.3% of capacity retention for PTFE-based cell). Additionally, polyolefin–wax-based cell showed superior high-rate capability owing to the high ionic conductivity of polyolefin–wax. These performance improvements are attributed to the mitigation of the large initial irreversible capacity observed in PTFE electrodes (initial coulombic efficiency, ICE: 76.1%). Furthermore, polyolefin-wax without C–F bonds is not susceptible to fire hazards even during mechanical shock testing. These results emphasize that a polyolefin–wax binder with good electrochemical stability and safety can be adopted for use in dry-processed anodes.

Zitieren

APA

Song, M., Choi, J., Choi, S., & Lee, Y. M. (2026). Polyolefin–Wax Binder Enables High-Safety Dry-Processed Graphite Electrode. ECS Meeting Abstracts, MA2026-01(2), 152-152. https://doi.org/10.1149/ma2026-012152mtgabs

Vancouver

Song M, Choi J, Choi S, Lee YM. Polyolefin–Wax Binder Enables High-Safety Dry-Processed Graphite Electrode. ECS Meeting Abstracts. 2026;MA2026-01(2):152-152. doi:10.1149/ma2026-012152mtgabs

BibTeX
@article{Song2026,
  author = {Song, Myunggeun and Choi, Junhyeok and Choi, Seungyeop and Lee, Yong Min},
  title = {Polyolefin–Wax Binder Enables High-Safety Dry-Processed Graphite Electrode},
  journal = {ECS Meeting Abstracts},
  year = {2026},
  volume = {MA2026-01},
  number = {2},
  pages = {152--152},
  doi = {10.1149/ma2026-012152mtgabs}
}
Kostenlos starten →