EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Low‐Resistance LiFePO 4 Thick Film Electrode Processed with Dry Electrode Technology for High‐Energy‐Density Lithium‐Ion Batteries

Kihwan Kwon, Jiwoon Kim, Seungmin Han, Joohyun Lee, Hyungjun Lee, Jiseok Kwon, Jungwoo Lee, Jihoon Seo, Patrick Joohyun Kim, Taeseup Song, Junghyun Choi iD

Small Science · 2024-05 · 4 (5)

DOI: 10.1002/smsc.202300302 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Small Science, online erschienen am 09.02.2024. Verfasst von Kihwan Kwon und 10 weiteren Autor:innen. Beteiligte Einrichtung: Energy Storage Materials Center Korea Institute of Ceramic Engineering and Technology Jinju 52851 Republic of Korea. Die Arbeit wurde bisher 101-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Trade, Industry and Energy.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

LiFePO 4 emerges as a viable alternative to cobalt‐containing cathodes, such as Li[Ni 1– x – y Mn x Co y ]O 2 and Li[Ni 1− x − y Co x Al y ]O 2 . As Fe is abundant in nature, LiFePO 4 is a low‐cost material. Moreover, stable structure of LiFePO 4 imparts long service life and thermal stability. However, the practical implementation of LiFePO 4 cathode in energy storage devices is impeded by its low energy density and high ionic/electrical resistance. Herein, the LiFePO 4 electrode with high active material loading and low ionic/electrical resistance through the dry process is reported for the first time. The dry process not only enables the uniform distribution of the polymeric binders and conductive additives within the thick electrode but also inhibits the formation of cracks. Furthermore, the bridge‐like connection of polytetrafluoroethylene facilitates the insertion and extraction of Li ions to the LiFePO 4 crystal. Hence, the dry‐processed LiFePO 4 electrode with high areal capacity (7.8 mAh cm −2 ) exhibits excellent cycle stability over 300 cycles in full‐cell operation. In addition, it is demonstrated that the estimated energy density of prismatic cell with the dry‐processed LiFePO 4 electrode is competitive with state‐of‐the‐art Li[Ni 1– x – y Mn x Co y ]O 2 ‐based battery.

Schlagwörter

Stichwörter der Autor:innen

dry processlithium ion batterieslithium iron phosphatepolytetrafluoroethylene

Autor:innen und Institutionen

  • Energy Storage Materials Center Korea Institute of Ceramic Engineering and Technology Jinju 52851 Republic of Korea.
  • Department of Applied Chemistry Kyungpook National University Daegu 41566 Republic of Korea.
  • Department of Energy Engineering Hanyang University 222 Wangsimni-ro Seoul 04763 Republic of Korea.
  • Department of Materials Science and Engineering Pusan National University Pusan 46241 Republic of Korea.
  • Department of Chemical & Biomolecular Engineering Clarkson University Potsdam NY 13699 USA.
  • Department of Battery Engineering Gachon University 1342, Seongnam-daero, Sujeong-gu Seongnam-si Gyeonggi-do Republic of Korea.

ORCID-Profile: Junghyun Choi

Förderung

  • Ministry of Trade, Industry and Energy

Zitieren

APA

Kwon, K., Kim, J., Han, S., Lee, J., Lee, H., Kwon, J., Lee, J., Seo, J., Kim, P. J., Song, T., & Choi, J. (2024). Low‐Resistance LiFePO 4 Thick Film Electrode Processed with Dry Electrode Technology for High‐Energy‐Density Lithium‐Ion Batteries. Small Science, 4(5). https://doi.org/10.1002/smsc.202300302

Vancouver

Kwon K, Kim J, Han S, Lee J, Lee H, Kwon J, et al. Low‐Resistance LiFePO 4 Thick Film Electrode Processed with Dry Electrode Technology for High‐Energy‐Density Lithium‐Ion Batteries. Small Science. 2024;4(5). doi:10.1002/smsc.202300302

BibTeX
@article{Kwon2024,
  author = {Kwon, Kihwan and Kim, Jiwoon and Han, Seungmin and Lee, Joohyun and Lee, Hyungjun and Kwon, Jiseok and Lee, Jungwoo and Seo, Jihoon and Kim, Patrick Joohyun and Song, Taeseup and Choi, Junghyun},
  title = {Low‐Resistance LiFePO 4 Thick Film Electrode Processed with Dry Electrode Technology for High‐Energy‐Density Lithium‐Ion Batteries},
  journal = {Small Science},
  year = {2024},
  volume = {4},
  number = {5},
  doi = {10.1002/smsc.202300302}
}
Kostenlos starten →