EUVIMEDEUVIMED entdecken
Crossref

Dry Manufacturing Process for Gelled Electrodes for Hybrid Polymer Lithium Battery

Helene Rouault, Benjamin Amestoy, Gaelle Besnard, Jérémie Salomon, Julio Abusleme, Dominique Bascour, Marc David Braida

ECS Meeting Abstracts · 07.07.2026 · MA2026-01 (1) · 43-43

DOI: 10.1149/ma2026-01143mtgabs ↗

Kurz gefasst

Fachartikel in der Zeitschrift ECS Meeting Abstracts, erschienen am 07.07.2026. Verfasst von Helene Rouault und 6 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Most of the current electric vehicles (EVs) are powered by Li-ion battery, because of its high specific energy density, fast charge/discharge ability, long cyclelife and low self-discharge rate 1,2 . Unfortunately, traditional Li-ion chemistry using liquid carbonate based electrolytes is approaching its physicochemical limitations, while the EVs request even longer range, fast charging and improved safety. Lithium solid-state batteries (SSBs) appear as a promising solution 3 . However their development remains highly challenging. It is the reason why CEA-Liten and Solvay are developing an intermediate technology, based on hybrid polymer lithium battery, where the organic electrolyte is confined in a hybrid polymer membrane as well as in gelled electrodes from their manufacturing. The gelled character of the electrodes, i.e. the retention of the electrolyte in the electrode microstructure is favored by the use of a Solvay proprietary poly(vinylidene fluoride) based polymer (denoted PVDF 1), capable to trap a lithium ion conducting organic solution. Specifically designed it ensures high adhesion of the electrodes to Al or Cu based current collector with porosity fully filled by carbonate based electrolyte. In addition, the preparation method of such gelled electrodes developed in non-toxic acetone media is similar to classical electrodes of Li-ion cell. Thus, assembled with hybrid polymer membrane without any additional electrolyte, the gelled electrodes work successfully at various discharge rates and exhibit a very stable behavior with very long cyclelife. However, on an industrial scale, there is growing demand for environmentally-friendly manufacturing processes (e.g. solventless or by a dry process commonly used as terminology). Such process overcomes many of the disadvantages associated with the use of solvents as solvent exposure and disposal. It reduces the overall cost due to the solvent treatment and it can significantly reduce the processing time, the drying step being eliminated. Consequently, CEA and Solvay has engaged a large program to develop a solventless process for preparing the gelled electrodes, using only the electrolyte to be confined as unique processing solvent. The manufacturing process combines a kneading method by extrusion at low temperature for preparing an electrolyte trapping electrode strip, which is then laminated and co-laminated to the current collector to form the gelled electrode. Due to its crystallinity and high melting point, the PVDF 1 was not adapted. Therefore, a new Solvay proprietary poly(vinylidene fluoride) based polymer (denoted PVDF 2) was so designed as binder in order to withstand the process conditions, especially the extrusion ones, allowing an efficient kneading of the electrode compounds and then the shaping in form of layer to be deposited on the current collector. As for the first generation of polymer, the new polymer favors the confinement of the whole carbonate based electrolyte in the “extruded” gelled electrode and allows its adhesion on the current collector. Formulated with PVDF 2, the “extruded” gelled electrodes can be easily prepared in double-side with high loadings. Assembled with hybrid polymer membrane, such gelled electrodes exhibit similar performances as conventional Li-ion electrodes with a very stable behavior and very long cycle life. Moreover, at high loading, they systematically offer better performances than the first generation of gelled electrodes, especially at high C-rates. 1 M. Armand, J-M. Tarascon, Nature 451 (2008) 652-657 2 S. Fletcher, Bottle Lightning: superbatteries, electric cars and the new lithium economy, Hill and Wang, New York, 2011 3 Y.K. Sun, ACS Energy Letters , 5 (10), (2020) 3221-3223

Zitieren

APA

Rouault, H., Amestoy, B., Besnard, G., Salomon, J., Abusleme, J., Bascour, D., & Braida, M. D. (2026). Dry Manufacturing Process for Gelled Electrodes for Hybrid Polymer Lithium Battery. ECS Meeting Abstracts, MA2026-01(1), 43-43. https://doi.org/10.1149/ma2026-01143mtgabs

Vancouver

Rouault H, Amestoy B, Besnard G, Salomon J, Abusleme J, Bascour D, et al. Dry Manufacturing Process for Gelled Electrodes for Hybrid Polymer Lithium Battery. ECS Meeting Abstracts. 2026;MA2026-01(1):43-43. doi:10.1149/ma2026-01143mtgabs

BibTeX
@article{Rouault2026,
  author = {Rouault, Helene and Amestoy, Benjamin and Besnard, Gaelle and Salomon, Jérémie and Abusleme, Julio and Bascour, Dominique and Braida, Marc David},
  title = {Dry Manufacturing Process for Gelled Electrodes for Hybrid Polymer Lithium Battery},
  journal = {ECS Meeting Abstracts},
  year = {2026},
  volume = {MA2026-01},
  number = {1},
  pages = {43--43},
  doi = {10.1149/ma2026-01143mtgabs}
}
Kostenlos starten →