Electrochemically Active Area in Composite Cathodes for All-Solid-State Batteries: Integrated Galvanostatic–Impedance Diagnostics
ECS Meeting Abstracts · 07.07.2026 · MA2026-01 (1) · 104-104
DOI: 10.1149/ma2026-011104mtgabs ↗Kurz gefasst
Fachartikel in der Zeitschrift ECS Meeting Abstracts, erschienen am 07.07.2026. Verfasst von So-Young Joo und 1 weiteren Autor:innen.
Abstract (Originalsprache)
All-solid-state batteries (ASSBs) have gained increasing attention as a viable next-generation energy storage technology due to their high safety and energy density. However, several technical challenges remain. Among them, the composite cathode is a key bottleneck, playing a decisive role in determining both the energy density and power capability of ASSBs. Its electrochemical behavior is governed by the microstructural arrangement and connectivity of multiple constituent phases, including cathode active materials (CAMs), solid electrolytes (SEs), binders, and conductive additives. In particular, the contact characteristics at the CAM–SE interface define the electrochemically active area (EAA) that participates in charge-transfer reactions and influence reaction kinetics and lithium-ion transport, thereby critically affecting ASSB performance. While CAM–SE contact characteristics strongly depend on design parameters (e.g., electrode composition) and manufacturing variables (e.g., stack pressure), they can also progressively deteriorate during cycling due to volume changes, especially in Ni-rich NCM cathodes. Therefore, quantitatively tracking changes in CAM–SE contact in real time is essential for performance optimization. Electrochemical analyses are nondestructive, applicable to practical cell configurations, and readily accessible in terms of instrumentation, making them attractive diagnostic tools for evaluating interfacial properties in ASSBs. Nevertheless, many prior studies have relied on a single electrochemical analysis or oversimplified models, which hinders quantitative decoupling of EAA from kinetic parameters that can compensate one another, often leading to qualitative interpretations. For instance, in electrochemical impedance spectroscopy (EIS), interfacial resistance is widely used to compare CAM–SE contact characteristics. However, this resistance is influenced by both the active area and charge-transfer kinetics, making independent extraction of EAA challenging. Similarly, galvanostatic-method (GM)-based analyses employ area-dependent diffusion models and extract an apparent diffusion coefficient from the early-time voltage response. While the extracted diffusion coefficient is sensitive to changes in effective active area, it also reflects variations in intrinsic solid-state diffusion, limiting its ability to independently diagnose CAM–SE interfacial contact. Consequently, accurate evaluation of interfacial contact in practical ASSB composite cathodes remains challenging, and an integrated electrochemical framework that simultaneously accounts for area-dependent and area-independent factors can help minimize their compensatory effects. In this study, an integrated GM–EIS framework is proposed to quantitatively determine the EAA of ASSB composite cathodes. In the EIS analysis, an area-independent diffusion coefficient (D1) is extracted from the Warburg-to-blocking transition region using the transition frequency combined with a spherical finite-diffusion model. This approach reduces geometric ambiguity and avoids explicit assumptions regarding the active area. In contrast, the GM analysis employs the early-time voltage response under semi-infinite diffusion conditions together with an area-dependent model to determine an apparent diffusion coefficient (D2). Within the integrated GM–EIS framework, D1 is treated as a reliable reference diffusion coefficient and fixed in the area-dependent model, allowing the EAA, as the sole remaining unknown parameter, to be independently back-calculated. Accordingly, by constraining the area-sensitive galvanostatic response using D1, the EAA can be quantitatively determined without requiring an explicit EAA assumption. To validate the proposed framework, it was applied to sulfide-based ASSBs employing Ni-rich cathodes, enabling quantitative analysis of EAA variations under various conditions. GM and EIS measurements conducted at different cathode lithiation states were used to extract diffusion-related parameters and evaluate the corresponding EAA. The results revealed a decrease in EAA as the cathode became more lithiated, consistent with previous reports indicating that lithium saturation reduces the number of effective intercalation sites. The effect of stack pressure on EAA was also investigated, revealing a sharp increase in EAA in the low-pressure regime followed by a gradual increase and eventual saturation at higher pressures. This behavior reflects reduced electrode porosity and expanded effective CAM–SE contact area with increasing pressure. Furthermore, the effects of CAM and SE particle size distributions on the EAA were systematically analyzed. Electrodes incorporating mixtures of fine and coarse SE particles exhibited higher EAA values than those employing a single particle size, and a similar enhancement in EAA was also observed for electrodes with mixed CAM particle sizes. Based on these results, rational electrode design conditions were proposed from the perspective of particle size distribution. Overall, this study presents a practical electrochemical tool for quantitatively evaluating CAM–SE interfacial contact in ASSB composite cathodes and provides systematic guidelines for process optimization and electrode design based on interfacial contact characteristics.
Zitieren
APA
Joo, S., & Shin, H. (2026). Electrochemically Active Area in Composite Cathodes for All-Solid-State Batteries: Integrated Galvanostatic–Impedance Diagnostics. ECS Meeting Abstracts, MA2026-01(1), 104-104. https://doi.org/10.1149/ma2026-011104mtgabs
Vancouver
Joo S, Shin H. Electrochemically Active Area in Composite Cathodes for All-Solid-State Batteries: Integrated Galvanostatic–Impedance Diagnostics. ECS Meeting Abstracts. 2026;MA2026-01(1):104-104. doi:10.1149/ma2026-011104mtgabs
BibTeX
@article{Joo2026,
author = {Joo, So-Young and Shin, Heon-Cheol},
title = {Electrochemically Active Area in Composite Cathodes for All-Solid-State Batteries: Integrated Galvanostatic–Impedance Diagnostics},
journal = {ECS Meeting Abstracts},
year = {2026},
volume = {MA2026-01},
number = {1},
pages = {104--104},
doi = {10.1149/ma2026-011104mtgabs}
}
EUVIMED