EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Impact of the Plasticizer Content on the Lithium Plating Behavior in Lithium Polymer Batteries

Katrin Geng, Vivaan Patel, Dominik Steinle, Pallab Barai, Medina Jasarevic, Michael Bowen, Venkat Srinivasan, Nitash Balsara, Dominic Bresser

Journal of The Electrochemical Society · 14.08.2026 · 173 (15) · 150505

DOI: 10.1149/1945-7111/ae8ebe ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of The Electrochemical Society, online erschienen am 03.08.2026. Verfasst von Katrin Geng und 8 weiteren Autor:innen. Die Arbeit nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: U.S. Department of Energy, Bundesministerium für Forschung, Technologie und Raumfahrt.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

At present, the only commercial lithium-metal battery (LMB) technology is based on polyethylene oxide (PEO) based electrolytes. However, its limited ionic conductivity at ambient temperatures requires the operation (discharge and charge) at elevated temperatures of around 60 °C–80 °C, i.e., close to and above the melting point of PEO. Herein, we investigate the impact of incorporating varying amounts of tetraethylene glycol dimethyl ether serving as chemically identical plasticizer to enhance the ionic conductivity also at lower temperatures. A comprehensive comparison of the physicochemical, electrochemical, and mechanical properties is conducted via complementary experimental and theoretical studies, with a particular focus on the impact on the morphology of the deposited lithium using ex situ X-ray tomography. The results reveal that the mechanical properties play a key role for achieving a homogeneous and smooth lithium deposition. These insights are anticipated to contribute to further optimized polymer-based electrolytes for next-generation LMBs.

Förderung

  • U.S. Department of Energy
  • Bundesministerium für Forschung, Technologie und Raumfahrt

Zitieren

APA

Geng, K., Patel, V., Steinle, D., Barai, P., Jasarevic, M., Bowen, M., Srinivasan, V., Balsara, N., & Bresser, D. (2026). Impact of the Plasticizer Content on the Lithium Plating Behavior in Lithium Polymer Batteries. Journal of The Electrochemical Society, 173(15), 150505. https://doi.org/10.1149/1945-7111/ae8ebe

Vancouver

Geng K, Patel V, Steinle D, Barai P, Jasarevic M, Bowen M, et al. Impact of the Plasticizer Content on the Lithium Plating Behavior in Lithium Polymer Batteries. Journal of The Electrochemical Society. 2026;173(15):150505. doi:10.1149/1945-7111/ae8ebe

BibTeX
@article{Geng2026,
  author = {Geng, Katrin and Patel, Vivaan and Steinle, Dominik and Barai, Pallab and Jasarevic, Medina and Bowen, Michael and Srinivasan, Venkat and Balsara, Nitash and Bresser, Dominic},
  title = {Impact of the Plasticizer Content on the Lithium Plating Behavior in Lithium Polymer Batteries},
  journal = {Journal of The Electrochemical Society},
  year = {2026},
  volume = {173},
  number = {15},
  pages = {150505},
  doi = {10.1149/1945-7111/ae8ebe}
}
Kostenlos starten →