EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Regulating Lithium Plating Behavior in Lithium‐Metal Batteries via Molten‐Lithium Processing With Inorganic Additives

Chaerim Kim, Jinyeong Choi, Chaerin Jung, Jihyeon Kang, Hyeongbeen Kim, Pilgun Oh, Jin Hong Lee, Sung Hyun Kwon iD, Minjoon Park iD

Small · 2026-08 · 22 (44)

DOI: 10.1002/smll.74228 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Small, online erschienen am 18.06.2026. Verfasst von Chaerim Kim und 8 weiteren Autor:innen. Beteiligte Einrichtung: Department of Nano Fusion Technology, Pusan National University, Busan, Republic of Korea. Die Arbeit nennt 77 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and ICT, National Research Foundation of the Republic of Korea, Ministry of Science and ICT, South Korea.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Lithium metal batteries (LMBs) are compelling candidates for next‐generation energy storage owing to the ultrahigh theoretical capacity (3,860 mAh g −1 ) and high energy density (400–500 Wh kg −1 ). However, uncontrollable dendrite growth, severe volume change, low Coulombic efficiency, and the poor lithiophilicity of Cu current collectors have impeded practical deployment. Here, we report a self‐assembled gradient interphase (SGI) produced in situ by reacting molten lithium with ZnF 2 . The SGI exhibits a self‐formed, vertically graded architecture. The SGI consists of a LiZn alloy sublayer that lowers nucleation overpotential and accelerates Li + transport, and a LiF layer that offers high ionic conductivity and outstanding air stability for durable interfacial stability. The lower LiZn alloy layer promotes uniform lithium nucleation by providing a low diffusion barrier and strong interfacial affinity, while the upper LiF layer forms a stable, inorganic SEI that effectively suppresses dendrite growth. The symmetric cell equipped with the SGI Li–Zn–F interphase exhibited highly durable cycling, maintaining stable operation for 3000 h under 4 mA cm −2 /16 mAh cm −2 . This dual‐layer configuration, in which distinct functional roles are spatially separated within the interphase, offers an advantage not attainable with conventional single‐layer coatings.

Schlagwörter

Stichwörter der Autor:innen

alloylithiumlithium metal anodelithium metal batterymolten lithiumzinc fluoride

Autor:innen und Institutionen

  • Department of Nano Fusion Technology, Pusan National University, Busan, Republic of Korea.
  • Research Center of Energy Convergence Technology, Pusan National University, Busan, Republic of Korea.
  • Eco-friendly Battery Engineering, Pusan National University, Busan, Republic of Korea.
  • Department of Smart Green Technology Engineering, Pukyong National University, Busan, Republic of Korea.
  • School of Chemical Engineering, Pusan National University, Busan, Republic of Korea.
  • Advanced Energy Major, School of Transdisciplinary Engineering, Pusan National University, Busan, Republic of Korea.

ORCID-Profile: Sung Hyun Kwon, Minjoon Park

Förderung

  • Ministry of Science and ICT
  • National Research Foundation of the Republic of Korea
  • Ministry of Science and ICT, South Korea

Zitieren

APA

Kim, C., Choi, J., Jung, C., Kang, J., Kim, H., Oh, P., Lee, J. H., Kwon, S. H., & Park, M. (2026). Regulating Lithium Plating Behavior in Lithium‐Metal Batteries via Molten‐Lithium Processing With Inorganic Additives. Small, 22(44). https://doi.org/10.1002/smll.74228

Vancouver

Kim C, Choi J, Jung C, Kang J, Kim H, Oh P, et al. Regulating Lithium Plating Behavior in Lithium‐Metal Batteries via Molten‐Lithium Processing With Inorganic Additives. Small. 2026;22(44). doi:10.1002/smll.74228

BibTeX
@article{Kim2026,
  author = {Kim, Chaerim and Choi, Jinyeong and Jung, Chaerin and Kang, Jihyeon and Kim, Hyeongbeen and Oh, Pilgun and Lee, Jin Hong and Kwon, Sung Hyun and Park, Minjoon},
  title = {Regulating Lithium Plating Behavior in Lithium‐Metal Batteries via Molten‐Lithium Processing With Inorganic Additives},
  journal = {Small},
  year = {2026},
  volume = {22},
  number = {44},
  doi = {10.1002/smll.74228}
}
Kostenlos starten →