EUVIMEDEUVIMED entdecken
Crossref

Controllability of Surface Morphology in Thin-Layer Electrochemically Induced Chemical Etching of Fused Silica

Sizhou Chen, Ping Zhou, Dongming Guo

Journal of The Electrochemical Society · 14.07.2026 · 173 (13) · 133511

DOI: 10.1149/1945-7111/ae8336 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of The Electrochemical Society, online erschienen am 08.07.2026. Verfasst von Sizhou Chen und 2 weiteren Autor:innen. Die Arbeit nennt 33 Literaturangaben. Gefördert von: National Natural Science Foundation of China, National Key Research and Development Program of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Fused silica is widely used in precision optics, yet damage-free nanoscale removal with controllable morphology remains difficult. Electrochemically induced chemical etching (ECICE) localizes HF-based etchant generation, but thin-layer operation at larger active areas introduces severe mass-transfer and solution-resistance-induced ohmic drop. Here, ECICE controllability was studied with a 500 μm Pt electrode and 10 μm electrolyte layer, representing a 400-fold active-area increase relative to prior 25 μm microelectrode ECICE. KNO 2 concentration, KF concentration, and temperature were varied to quantify etch depth and morphology, and the results were interpreted using a secondary-current-distribution/species-transport finite-element model. Low KF limited etching, whereas excessive KF produced precipitate-like deposits. Low KNO 2 suppressed HF generation, while excess promoted outward HF/HF 2 − diffusion and W-type or irregular pits. The recommended condition, 0.6 mol l −1 KNO 2 + 1.0 mol l −1 KF, yielded a depth of 166.8 nm with a 0.87 nm standard deviation at 25 °C. The model indicates that NO 2 − and F − are depleted near the electrode center, while HF/HF 2 − concentration peaks shift outward, consistent with W-type morphology. EIS gave R s = 1481 Ω, confirming significant ohmic resistance in the confined electrolyte. Galvanostatic operation with optimized electrolyte composition and temperature control is recommended to improve ECICE controllability.

Förderung

  • National Natural Science Foundation of China
  • National Key Research and Development Program of China

Zitieren

APA

Chen, S., Zhou, P., & Guo, D. (2026). Controllability of Surface Morphology in Thin-Layer Electrochemically Induced Chemical Etching of Fused Silica. Journal of The Electrochemical Society, 173(13), 133511. https://doi.org/10.1149/1945-7111/ae8336

Vancouver

Chen S, Zhou P, Guo D. Controllability of Surface Morphology in Thin-Layer Electrochemically Induced Chemical Etching of Fused Silica. Journal of The Electrochemical Society. 2026;173(13):133511. doi:10.1149/1945-7111/ae8336

BibTeX
@article{Chen2026,
  author = {Chen, Sizhou and Zhou, Ping and Guo, Dongming},
  title = {Controllability of Surface Morphology in Thin-Layer Electrochemically Induced Chemical Etching of Fused Silica},
  journal = {Journal of The Electrochemical Society},
  year = {2026},
  volume = {173},
  number = {13},
  pages = {133511},
  doi = {10.1149/1945-7111/ae8336}
}
Kostenlos starten →