Influence of Conversion Time on Polymeric Speciation in Zirconium Conversion Coatings Deposited on Aluminium Alloy 5754: A ToF-SIMS Study
Journal of The Electrochemical Society · 14.04.2026 · 173 (7) · 071501
DOI: 10.1149/1945-7111/ae54d6 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of The Electrochemical Society, online erschienen am 31.03.2026. Verfasst von Ana Kraš und 3 weiteren Autor:innen. Die Arbeit nennt 73 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: The Slovenian Research and Innovation Agency.
Abstract (Originalsprache)
The influence of conversion time on polymeric speciation and protective performance of zirconium conversion coatings (ZrCCs) on aluminium alloy AA5754 was investigated using samples treated in 150 ppm H 2 ZrF 6 at pH 4.6 for 230 s and 480 s. Characterisation combined time-of-flight secondary ion mass spectrometry (ToF-SIMS) with region-of-interest analysis, electrochemical impedance spectroscopy in dilute Harrison’s solution after one hour, atomic force microscopy, and contact-angle measurements. ZrCC thickening is conversion-time-dependent, with a preference for growth above intermetallic particles. ToF-SIMS identified monomeric, dimeric, and trimeric zirconium hydroxide fragments, while tetrameric species were detected only at very low intensities, in contrast to previous observations on steel, possibly due to the lower overall pH increase during ZrCC formation. Despite the thicker layer obtained at 480 s, EIS indicated no improvement in corrosion protection compared with the 230 s. Morphological and wettability analyses further showed that the shorter treatment produced a rougher but more compact and uniform coating, which correlates with better short-term protective behaviour. These findings emphasise that compactness and uniformity, rather than thickness or wettability, govern the early protective function of ZrCCs and raise the question of whether tetrameric polymeric forms are required to establish a protective layer, as hypothesised for cold-rolled steel.
Förderung
- The Slovenian Research and Innovation Agency
Zitieren
APA
Kraš, A., Milošev, I., Seyeux, A., & Marcus, P. (2026). Influence of Conversion Time on Polymeric Speciation in Zirconium Conversion Coatings Deposited on Aluminium Alloy 5754: A ToF-SIMS Study. Journal of The Electrochemical Society, 173(7), 071501. https://doi.org/10.1149/1945-7111/ae54d6
Vancouver
Kraš A, Milošev I, Seyeux A, Marcus P. Influence of Conversion Time on Polymeric Speciation in Zirconium Conversion Coatings Deposited on Aluminium Alloy 5754: A ToF-SIMS Study. Journal of The Electrochemical Society. 2026;173(7):071501. doi:10.1149/1945-7111/ae54d6
BibTeX
@article{Kra2026,
author = {Kraš, Ana and Milošev, Ingrid and Seyeux, Antoine and Marcus, Philippe},
title = {Influence of Conversion Time on Polymeric Speciation in Zirconium Conversion Coatings Deposited on Aluminium Alloy 5754: A ToF-SIMS Study},
journal = {Journal of The Electrochemical Society},
year = {2026},
volume = {173},
number = {7},
pages = {071501},
doi = {10.1149/1945-7111/ae54d6}
}
EUVIMED