EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Fabrication of Vanadium–Zirconium Conversion Coatings on 6061 Aluminum Alloy and Performance Modulation by Additives

Jiahao Fan, Song Luo, Li Zheng, Zhoumao Song, Xianrui Pen

Coatings · 26.11.2025 · 15 (12) · 1382

DOI: 10.3390/coatings15121382 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Coatings, online erschienen am 26.11.2025. Verfasst von Jiahao Fan und 4 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Sichuan Province Science and Technology Program.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Aluminum alloys used in harsh environments often suffer from inadequate protection due to the limited compactness and stability of existing chromate-free conversion coatings. This study designs and optimizes a corrosion-resistant vanadium-based conversion coating on 6061 aluminum alloy and investigates the influence of additives on its structure and performance. The effects of solution pH (2–4), reaction temperature (35–75 °C), and immersion time (10–30 min) on coating corrosion resistance were examined. The optimal parameters were determined as pH = 3, 55 °C, and 25 min, yielding a compact coating with excellent corrosion resistance (icorr = 0.335 μA·cm−2, Ecorr = −0.596 V, |Z| = 48.7 kΩ·cm2). To further enhance performance, polyvinyl alcohol (PVA), chitosan (CS), and a combination of sodium hexametaphosphate and cerium nitrate (SHMP + Ce(NO3)3) were introduced into the conversion solution. Characterization by SEM, AFM, and contact angle measurements showed that SHMP + Ce(NO3)3 significantly improved coating uniformity and compactness (Rq = 131 nm, Ra = 107 nm), resulting in superior corrosion resistance (icorr = 0.055 μA·cm−2, |Z| = 67.9 kΩ·cm2). The coating exhibited strong adhesion (grade 5B) and no visible corrosion after 72 h of neutral salt spray exposure, demonstrating excellent protective capability. In contrast, PVA produced porous coatings with reduced resistance, while CS provided only limited improvement.

Förderung

  • Sichuan Province Science and Technology Program

Zitieren

APA

Fan, J., Luo, S., Zheng, L., Song, Z., & Pen, X. (2025). Fabrication of Vanadium–Zirconium Conversion Coatings on 6061 Aluminum Alloy and Performance Modulation by Additives. Coatings, 15(12), 1382. https://doi.org/10.3390/coatings15121382

Vancouver

Fan J, Luo S, Zheng L, Song Z, Pen X. Fabrication of Vanadium–Zirconium Conversion Coatings on 6061 Aluminum Alloy and Performance Modulation by Additives. Coatings. 2025;15(12):1382. doi:10.3390/coatings15121382

BibTeX
@article{Fan2025,
  author = {Fan, Jiahao and Luo, Song and Zheng, Li and Song, Zhoumao and Pen, Xianrui},
  title = {Fabrication of Vanadium–Zirconium Conversion Coatings on 6061 Aluminum Alloy and Performance Modulation by Additives},
  journal = {Coatings},
  year = {2025},
  volume = {15},
  number = {12},
  pages = {1382},
  doi = {10.3390/coatings15121382}
}
Kostenlos starten →