EUVIMEDEUVIMED entdecken
Crossref

Hybrid PSO-GA Optimization and Surface Morphology Analysis of Abrasive Water Jet Machining Process for Ti-6Al-4V Alloy

Vineet Kumar Rai, Pallav Gupta, Suresh Chand Jayswal, Dhirendra Kumar Singh

Journal of Advanced Manufacturing Systems · 28.04.2026 · 1-28

DOI: 10.1142/s0219686727500648 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Advanced Manufacturing Systems, online erschienen am 28.04.2026. Verfasst von Vineet Kumar Rai und 3 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Abrasive water jet machining (AWJM) is a precise nontraditional cutting process suitable for difficult-to-machine materials like titanium alloys. This study presents a multi-response optimization of AWJM parameters for Ti-6Al-4V alloy by integrating response surface methodology (RSM) with a hybrid Particle Swarm Optimization-Genetic Algorithm (PSO-GA). The influence of four key process parameters — water pressure (150–250 MPa), abrasive mesh size (#80–#120), traverse speed (50–150 mm/min), and abrasive flow rate (220–420 g/min) — on material removal rate (MRR) and kerf taper angle (KTA) was investigated. A Box–Behnken design (BBD) was employed to conduct 29 experiments, and the resulting data were used to develop predictive models. Parametric analysis revealed that abrasive mesh size is the most dominant factor influencing both MRR and KTA. The hybrid PSO-GA algorithm was developed and its performance was benchmarked against standalone PSO and GA. Algorithm performance metrics: convergence in four iterations, computational time of 0.3594 s, MAPE of 1.1398%, success rate of 89%. The optimal machining conditions: pressure 150 MPa, abrasive mesh size #120, traverse speed 150 mm/min, abrasive flow rate 380 g/min. Improvement in combined objective function: 7.43% compared to the best experimental run. Scanning electron microscopy (SEM) analysis of the machined surfaces under these conditions confirmed ductile erosion mechanisms characterized by parallel grooves, plastically deformed layers, and embedded abrasive particles. The results demonstrate that the hybrid PSO-GA approach is an effective and robust tool for optimizing complex manufacturing processes like AWJM.

Zitieren

APA

Rai, V. K., Gupta, P., Jayswal, S. C., & Singh, D. K. (2026). Hybrid PSO-GA Optimization and Surface Morphology Analysis of Abrasive Water Jet Machining Process for Ti-6Al-4V Alloy. Journal of Advanced Manufacturing Systems, 1-28. https://doi.org/10.1142/s0219686727500648

Vancouver

Rai VK, Gupta P, Jayswal SC, Singh DK. Hybrid PSO-GA Optimization and Surface Morphology Analysis of Abrasive Water Jet Machining Process for Ti-6Al-4V Alloy. Journal of Advanced Manufacturing Systems. 2026:1-28. doi:10.1142/s0219686727500648

BibTeX
@article{Rai2026,
  author = {Rai, Vineet Kumar and Gupta, Pallav and Jayswal, Suresh Chand and Singh, Dhirendra Kumar},
  title = {Hybrid PSO-GA Optimization and Surface Morphology Analysis of Abrasive Water Jet Machining Process for Ti-6Al-4V Alloy},
  journal = {Journal of Advanced Manufacturing Systems},
  year = {2026},
  pages = {1--28},
  doi = {10.1142/s0219686727500648}
}
Kostenlos starten →