EUVIMEDEUVIMED entdecken
Crossref

Investigations on the Impact of Mold Age on Green Sand Properties and Casting Defects: A Comparative Study of FIFF and LIFF Methods

Harshwardhan Chandrakant Pandit, Arunkumar Padmakumar, Anand Sharad Deshpande

Journal of Advanced Manufacturing Systems · 2026-09 · 25 (05) · 843-872

DOI: 10.1142/s0219686726500356 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Advanced Manufacturing Systems, online erschienen am 12.07.2025. Verfasst von Harshwardhan Chandrakant Pandit und 2 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 67 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Green sand molding remains a cornerstone of ferrous casting, yet the time-dependent deterioration of mold properties, referred to as mold age, has not been quantitatively explored. This study introduces a novel method to define and calculate mold age based on molding and holding times. It examines its influence on critical green sand properties: Green compressive strength (GCS), moisture content, permeability, and hardness. Using a Taguchi L [Formula: see text] design of experiments (DoE) approach, two mold scheduling strategies were experimentally evaluated: First-In, First-Fill (FIFF), and Last-In, First-Fill (LIFF). Under FIFF, molds aged 30-24 min significantly deteriorated, with moisture content dropping to 2.0–2.2%, GCS falling to 1126–1173 g/cm 2 , and permeability rising to 158. These molds also exhibited the highest defect rates. In contrast, LIFF scheduling preserved mold integrity more effectively; molds aged 12–26 min retained higher moisture (3.9–2.5%) and GCS (1350–1203 g/cm 2 ), with defects only appearing beyond a critical threshold of 26–28 min of mold age. Regression models demonstrated excellent predictive accuracy ( [Formula: see text] 2 up to 1.00; RRMSE as low as 0.02%), validating the link between mold age and property degradation. This research is the first to quantify aging thresholds, offering a practical, data-driven framework for scheduling optimization. The findings highlight the value of LIFF scheduling in enhancing casting consistency, especially in small- and medium-scale foundries, and provide a foundation for integrating real-time mold age monitoring into digital foundry workflows.

Zitieren

APA

Pandit, H. C., Padmakumar, A., & Deshpande, A. S. (2026). Investigations on the Impact of Mold Age on Green Sand Properties and Casting Defects: A Comparative Study of FIFF and LIFF Methods. Journal of Advanced Manufacturing Systems, 25(05), 843-872. https://doi.org/10.1142/s0219686726500356

Vancouver

Pandit HC, Padmakumar A, Deshpande AS. Investigations on the Impact of Mold Age on Green Sand Properties and Casting Defects: A Comparative Study of FIFF and LIFF Methods. Journal of Advanced Manufacturing Systems. 2026;25(05):843-872. doi:10.1142/s0219686726500356

BibTeX
@article{Pandit2026,
  author = {Pandit, Harshwardhan Chandrakant and Padmakumar, Arunkumar and Deshpande, Anand Sharad},
  title = {Investigations on the Impact of Mold Age on Green Sand Properties and Casting Defects: A Comparative Study of FIFF and LIFF Methods},
  journal = {Journal of Advanced Manufacturing Systems},
  year = {2026},
  volume = {25},
  number = {05},
  pages = {843--872},
  doi = {10.1142/s0219686726500356}
}
Kostenlos starten →