EUVIMEDEUVIMED entdecken
Crossref

Design Optimization and Fabrication of Metal 3D Printed Wheel Hub Using AlSi10Mg: A Comprehensive Review

Yetin Sai, Shyam K. Ladhad, Rajesh Ramesh, Nishan A. Bandekar, Mantesh B. Khot

Journal of Advanced Manufacturing Systems · 2026-01 · 25 (01) · 65-111

DOI: 10.1142/s0219686726500046 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Advanced Manufacturing Systems, online erschienen am 14.06.2025. Verfasst von Yetin Sai und 4 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 63 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The industry of manufacturing has undergone a remarkable shift with the advent of Metal 3D printing technology, which offers unmatched design and optimization flexibility. The idea of metal 3D printing is important to this generation of the fourth industrial revolution within the context of Industry 4.0. Utilizing the goals of metal additive manufacturing (AM) technology, this review aims to develop and create high-performance wheel hubs for automotive and aerospace applications utilizing the aluminum-based alloy AlSi10Mg. The amount of literature that was reviewed assisted in determining a number of factors to be taken into account while carrying out the task as well as in deciding on the material and method that would be used for fabrication. The study uses physical testing and a numerical approach to assess the wheel hub performance. From the available literature, Subramanian and Oza [Strength analysis of a ventilated brake disc-hubassembly for a multi-utility vehicle, Int. Res. J. Eng. Technol. 2 (2) 726-730 2015] found that AlSi10Mg is the most suitable material which can be used for fabricating a wheel hub. The design of the wheel hub has been analyzed in the Ansys software based on the results obtained; it was found out that the maximum von-Mises stress is 110–120 MPa and the deformation ranges from 0.15–0.25 mm with FOS ranging in 2.5–2.8 which falls under the real-life application. The weight reduction in the wheel hub from the initial wheel hub dropped at around 31.61% of its weight helped in increasing other parameters of the vehicle. Future research will be concentrated on identifying better ways to optimize the existing wheel hub design and, if relevant, adopting a better production process.

Zitieren

APA

Sai, Y., Ladhad, S. K., Ramesh, R., Bandekar, N. A., & Khot, M. B. (2026). Design Optimization and Fabrication of Metal 3D Printed Wheel Hub Using AlSi10Mg: A Comprehensive Review. Journal of Advanced Manufacturing Systems, 25(01), 65-111. https://doi.org/10.1142/s0219686726500046

Vancouver

Sai Y, Ladhad SK, Ramesh R, Bandekar NA, Khot MB. Design Optimization and Fabrication of Metal 3D Printed Wheel Hub Using AlSi10Mg: A Comprehensive Review. Journal of Advanced Manufacturing Systems. 2026;25(01):65-111. doi:10.1142/s0219686726500046

BibTeX
@article{Sai2026,
  author = {Sai, Yetin and Ladhad, Shyam K. and Ramesh, Rajesh and Bandekar, Nishan A. and Khot, Mantesh B.},
  title = {Design Optimization and Fabrication of Metal 3D Printed Wheel Hub Using AlSi10Mg: A Comprehensive Review},
  journal = {Journal of Advanced Manufacturing Systems},
  year = {2026},
  volume = {25},
  number = {01},
  pages = {65--111},
  doi = {10.1142/s0219686726500046}
}
Kostenlos starten →