EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Corrosion-Fatigue Performance of 3D-Printed (L-PBF) AlSi10Mg

Clara Linder iD, Flavien Vucko iD, Taoran Ma, Sebastian Proper iD, Erik Dartfeldt iD

Materials · 31.08.2023 · 16 (17) · 5964

DOI: 10.3390/ma16175964 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 31.08.2023. Verfasst von Clara Linder und 4 weiteren Autor:innen. Beteiligte Einrichtung: RISE, Corrosion, Vehicle and Surface Protection, Isafjordsgatan 28, 164 40 Kista, Sweden. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Additive manufacturing (AM) allows for optimized part design, reducing weight compared to conventional manufacturing. However, the microstructure, surface state, distribution, and size of internal defects (e.g., porosities) are very closely related to the AM fabrication process and post-treatment operations. All these parameters can have a strong impact on the corrosion and fatigue performance of the final component. Thus, the fatigue-corrosion behavior of the 3D-printed (L-PBF) AlSi10Mg aluminum alloy has been investigated. The influence of load sequence (sequential vs. combined) was explored using Wöhler diagrams. Surface roughness and defects in AM materials were examined, and surface treatment was applied to improve surface quality. The machined specimens showed the highest fatigue properties regardless of load sequence by improving both the roughness and removing the contour layer containing the highest density of defect. The impact of corrosion was more pronounced for as-printed specimens as slightly deeper pits were formed, which lowered the fatigue-corrosion life. As discussed, the corrosion, fatigue and fatigue-corrosion mechanisms were strongly related to the local microstructure and existing defects in the AM sample.

Schlagwörter

Stichwörter der Autor:innen

3D printingAlSi10Mgadditive manufacturingaluminum alloysatmospheric corrosionfatigue

Autor:innen und Institutionen

  • RISE, Corrosion, Vehicle and Surface Protection, Isafjordsgatan 28, 164 40 Kista, Sweden.
  • French Corrosion Institute-RISE, 220 rue Pierre Rivoalon, 29200 Brest, France.
  • RISE, Manufacturing Processes, Additive Manufacturing, Argongatan 30, 431 53 Mölndal, Sweden.
  • RISE, Chemistry and Applied Mechanics, Mechanical Research and Innovation, Gibraltargatan 35, 412 79 Göteborg, Sweden.

ORCID-Profile: Clara Linder, Flavien Vucko, Sebastian Proper, Erik Dartfeldt

Zitieren

APA

Linder, C., Vucko, F., Ma, T., Proper, S., & Dartfeldt, E. (2023). Corrosion-Fatigue Performance of 3D-Printed (L-PBF) AlSi10Mg. Materials, 16(17), 5964. https://doi.org/10.3390/ma16175964

Vancouver

Linder C, Vucko F, Ma T, Proper S, Dartfeldt E. Corrosion-Fatigue Performance of 3D-Printed (L-PBF) AlSi10Mg. Materials. 2023;16(17):5964. doi:10.3390/ma16175964

BibTeX
@article{Linder2023,
  author = {Linder, Clara and Vucko, Flavien and Ma, Taoran and Proper, Sebastian and Dartfeldt, Erik},
  title = {Corrosion-Fatigue Performance of 3D-Printed (L-PBF) AlSi10Mg},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {17},
  pages = {5964},
  doi = {10.3390/ma16175964}
}
Kostenlos starten →