A Jitter Cleaner PLL with Low 1/f 3 Noise LC VCO and Fast-Locking Aids in 110nm CMOS
Journal of Circuits, Systems and Computers · 13.05.2026
DOI: 10.1142/s0218126626502002 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Circuits, Systems and Computers, online erschienen am 13.05.2026. Verfasst von Xu Meng und 3 weiteren Autor:innen. Die Arbeit nennt 38 Literaturangaben. Gefördert von: Key Technologies Research and Development Program.
Abstract (Originalsprache)
This paper presents a systematic design of a low-flicker-noise LC voltage-controlled oscillator (VCO) and its application in a jitter cleaner phase-locked loop (PLL). In the LC VCO design, the [Formula: see text] corner frequency is reduced from 1[Formula: see text]MHz to below 100[Formula: see text]kHz through the coordinated optimization of a multilayer inductor, tail resistor biasing and supply voltage. This optimization suppresses the upconverted flicker noise and significantly reduces the integrated RMS jitter, which is critical for ultra-narrow bandwidth PLLs. The inductor design employs a stacked structure to achieve a higher self-resonant frequency and stable inductance. For the active core, long-channel transistors are utilized to minimize flicker noise injection. At the tail, resistor degeneration replaces the conventional current source, effectively lowering flicker noise while maintaining robustness against process, voltage and temperature (PVT) variations. The capacitor array features a switching topology with varactors ratioed to the main varactor, complemented by a MOSFET-C low-pass filter on the control lines to suppress driver-stage noise, reducing flicker noise contribution by 30% while ensuring tuning linearity. To suppress the jitter peaking effect, a large off-chip capacitor is used for the loop filter, resolving the area-versus-parasitic trade-off of on-chip solutions and enabling an overdamped design that reduces jitter peaking to below 0.2[Formula: see text]dB. Furthermore, a fast-locking mechanism is introduced to overcome the long settling time associated with the narrow bandwidth, with experimental results showing nearly 90% reduction in lock time. Post-layout simulations in 110[Formula: see text]nm CMOS process show that the design occupies a core area of 0.69[Formula: see text]mm 2 , achieves a 2.97[Formula: see text]GHz output with integrated jitter of 0.9[Formula: see text]ps and phase noise below [Formula: see text]120[Formula: see text]dBc/Hz at 1[Formula: see text]MHz offset, meeting SMPTE 425[Formula: see text]standard requirements.
Förderung
- Key Technologies Research and Development Program
Zitieren
APA
Meng, X., Yang, J., Zhang, Y., & Zeng, Y. (2026). A Jitter Cleaner PLL with Low 1/f 3 Noise LC VCO and Fast-Locking Aids in 110nm CMOS. Journal of Circuits, Systems and Computers. https://doi.org/10.1142/s0218126626502002
Vancouver
Meng X, Yang J, Zhang Y, Zeng Y. A Jitter Cleaner PLL with Low 1/f 3 Noise LC VCO and Fast-Locking Aids in 110nm CMOS. Journal of Circuits, Systems and Computers. 2026. doi:10.1142/s0218126626502002
BibTeX
@article{Meng2026,
author = {Meng, Xu and Yang, Jiawen and Zhang, Yuxiao and Zeng, Yejuan},
title = {A Jitter Cleaner PLL with Low 1/f 3 Noise LC VCO and Fast-Locking Aids in 110nm CMOS},
journal = {Journal of Circuits, Systems and Computers},
year = {2026},
doi = {10.1142/s0218126626502002}
}
EUVIMED