EUVIMEDEUVIMED entdecken
Crossref

Design of Low Phase Noise Cross-coupled VCO in 90nm CMOS Technology

Lu Wang, Prasanta Ghosh

IMAPSource Proceedings · 22.06.2026 · 2009 (Symposium)

DOI: 10.4071/001c.163695 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IMAPSource Proceedings, online erschienen am 22.06.2026. Verfasst von Lu Wang und 1 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A 2.5GHz low phase noise cross-coupled Voltage Controlled Oscillator (VCO) realized in 90nm CMOS technology is presented. High Q and low Q inductors are used in the design. The power consumption of the VCO is 25mW with the low Q inductor and 8.52mW with the high Q inductor. The tuning range for the two different designs is same, which is 13.2%. The phase noise of the two different designs are both below -120dBc/Hz at 1MHz offset frequency when the frequency of oscillation is 2.5GHz.

Zitieren

APA

Wang, L., & Ghosh, P. (2026). Design of Low Phase Noise Cross-coupled VCO in 90nm CMOS Technology. IMAPSource Proceedings, 2009(Symposium). https://doi.org/10.4071/001c.163695

Vancouver

Wang L, Ghosh P. Design of Low Phase Noise Cross-coupled VCO in 90nm CMOS Technology. IMAPSource Proceedings. 2026;2009(Symposium). doi:10.4071/001c.163695

BibTeX
@article{Wang2026,
  author = {Wang, Lu and Ghosh, Prasanta},
  title = {Design of Low Phase Noise Cross-coupled VCO in 90nm CMOS Technology},
  journal = {IMAPSource Proceedings},
  year = {2026},
  volume = {2009},
  number = {Symposium},
  doi = {10.4071/001c.163695}
}
Kostenlos starten →