Thermoforming 2D films into 3D electronics for high-performance, customizable tactile sensing
Science Advances · 16.05.2025 · 11 (20)
DOI: 10.1126/sciadv.adv0057 ↗Kurz gefasst
Fachartikel in der Zeitschrift Science Advances, erschienen am 16.05.2025. Verfasst von Jungrak Choi und 12 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon 34141, South Kor…. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei in PubMed Central verfügbar.
Abstract (Originalsprache)
The demand for tactile sensors in robotics, virtual reality, and health care highlights the need for high performance and customizability. Despite advances in vision-based technologies, tactile sensing remains crucial for precise interaction and subtle pressure detection. In this work, we present a design and fabrication method of customizable tactile sensors based on thermoformed three-dimensional electronics. This approach enables ultrawide modulus tunability (10 pascals to 1 megapascal) and superior mechanical properties, including negligible hysteresis and high creep resistance. These features allow the sensor to detect a broad spectrum of pressures, from acoustic waves to body weight, with high performance. The proposed sensors have high sensitivity (up to 5884 per kilopascal), high linearity ( R 2 = 0.999), low hysteresis (
Autor:innen und Institutionen
- Department of Mechanical Engineering, Korea Advanced Institute of Science and Technology (KAIST), 291 Daehak-ro, Yuseong-gu, Daejeon 34141, South Korea.
- Electronics and Telecommunications Research Institute (ETRI), Daejeon 34129, South Korea.
- Department of Mechanical Engineering, Hanbat National University, Yuseong-gu, Daejeon 34158, South Korea.
- School of Mechanical Engineering, Kyungpook National University, 80 Daehakro, Bukgu, Daegu 41566, South Korea.
- Department of Control and Instrumentation Engineering, Korea University, Sejong 30019 21 South Korea.
- Department of Mechanical Engineering, University of California, Berkeley, CA 94720, USA.
ORCID-Profile: Jungrak Choi, Hyunjin Kim, Gihun Lee, Ji-Hwan Ha, Yongrok Jeong, Junseong Ahn, Hyunkyu Park, Hyeonseok Han, Seokjoo Cho, Jimin Gu, Inkyu Park
Zitieren
APA
Choi, J., Han, C., Lee, D., Kim, H., Lee, G., Ha, J. H., Jeong, Y., Ahn, J., Park, H., Han, H., Cho, S., Gu, J., & Park, I. (2025). Thermoforming 2D films into 3D electronics for high-performance, customizable tactile sensing. Science Advances, 11(20). https://doi.org/10.1126/sciadv.adv0057
Vancouver
Choi J, Han C, Lee D, Kim H, Lee G, Ha JH, et al. Thermoforming 2D films into 3D electronics for high-performance, customizable tactile sensing. Science Advances. 2025;11(20). doi:10.1126/sciadv.adv0057
BibTeX
@article{Choi2025,
author = {Choi, Jungrak and Han, Chankyu and Lee, Donho and Kim, Hyunjin and Lee, Gihun and Ha, Ji-Hwan and Jeong, Yongrok and Ahn, Junseong and Park, Hyunkyu and Han, Hyeonseok and Cho, Seokjoo and Gu, Jimin and Park, Inkyu},
title = {Thermoforming 2D films into 3D electronics for high-performance, customizable tactile sensing},
journal = {Science Advances},
year = {2025},
volume = {11},
number = {20},
doi = {10.1126/sciadv.adv0057}
}
EUVIMED