EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

DLP‐Printable Porous Cryogels for 3D Soft Tactile Sensing

Diana Cafiso, Federico Bernabei, Matteo Lo Preti, Simone Lantean, Ignazio Roppolo, Candido Fabrizio Pirri, Lucia Beccai

Advanced Materials Technologies · 2024-05 · 9 (10)

DOI: 10.1002/admt.202302041 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials Technologies, online erschienen am 14.02.2024. Verfasst von Diana Cafiso und 6 weiteren Autor:innen. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 71 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Horizon 2020 Framework Programme.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Three‐Dimensional (3D) printed porous materials hold the potential for various soft sensing applications due to their remarkable flexibility, low density, and customizable geometries. However, developing versatile and efficient fabrication methods is crucial to unlock their full potential. A novel approach is introduced by combining Digital Light Processing (DLP) 3D printing and freeze‐drying to manufacture deformable cryogels featuring intricate morphologies. Photocurable hydrogels based on Poly(3,4‐ethylenedioxythiophene)Polystyrene sulfonate (PEDOT:PSS), Polyethylene glycol Diacrylate (PEGDA) and Ethylene Glycol (EG) are successfully printed and lyophilized. In this way, porous cryogels with tailorable properties are achieved. Microporosity varies from 68% to 96%, according to the chemical composition. Ultra‐soft cryogels with a compressive modulus of 0.13MPa are fabricated by adding a reactive diluent. As a result of the cryogelation process, which effectively removes water from the hydrogels, microporous structures with details as fine as 100 µm are obtained. The achieved freedom of design is exploited to fabricate resistive force sensors with a honeycomb lattice morphology. The sensitivity and the working range of the sensors can be tailored by tuning the size of the cells, paving the way for sensors with programmable architectures that can meet diverse requirements.

Förderung

  • Horizon 2020 Framework Programme

Zitieren

APA

Cafiso, D., Bernabei, F., Preti, M. L., Lantean, S., Roppolo, I., Pirri, C. F., & Beccai, L. (2024). DLP‐Printable Porous Cryogels for 3D Soft Tactile Sensing. Advanced Materials Technologies, 9(10). https://doi.org/10.1002/admt.202302041

Vancouver

Cafiso D, Bernabei F, Preti ML, Lantean S, Roppolo I, Pirri CF, et al. DLP‐Printable Porous Cryogels for 3D Soft Tactile Sensing. Advanced Materials Technologies. 2024;9(10). doi:10.1002/admt.202302041

BibTeX
@article{Cafiso2024,
  author = {Cafiso, Diana and Bernabei, Federico and Preti, Matteo Lo and Lantean, Simone and Roppolo, Ignazio and Pirri, Candido Fabrizio and Beccai, Lucia},
  title = {DLP‐Printable Porous Cryogels for 3D Soft Tactile Sensing},
  journal = {Advanced Materials Technologies},
  year = {2024},
  volume = {9},
  number = {10},
  doi = {10.1002/admt.202302041}
}
Kostenlos starten →