Pluralizing actuation behavior of 3D printable liquid crystal elastomers via polymerization sequence control
Science Advances · 09.08.2024 · 10 (32)
DOI: 10.1126/sciadv.adp4814 ↗Kurz gefasst
Fachartikel in der Zeitschrift Science Advances, erschienen am 09.08.2024. Verfasst von Wenjun Peng und 8 weiteren Autor:innen. Beteiligte Einrichtung: National Engineering Laboratory for Textile Fiber Materials and Processing Technology (Zhejiang), School of Materials Science and Engineering, Zhejia…. Die Arbeit wurde bisher 30-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei in PubMed Central verfügbar.
Abstract (Originalsprache)
Mechanical stretching is commonly used for mesogen alignment which is essential for the muscle-like actuations of liquid crystal elastomers (LCEs). Despite the simplicity of the method, the mesogens are typically aligned in the stretching direction, limiting exclusively the LCE to an actuation mode of cooling-induced elongation. Here, we design an interpenetrating double network consisting of an LCE network and an elastomer network, with one polymerized network stretched before the polymerization of the other network. Depending on the polymerization sequence of the two networks, the double network shows two opposite actuation modes, namely, the conventional cooling-induced elongation or an unusual cooling-induced contraction. Strategic integration of the two opposite behaviors into the same LCE leads to sophisticated actuation difficult to achieve with a conventional LCE design. Coupled with 3D printing, geometrically complexed LCEs with diverse multimodal four-dimensional actuation behaviors are illustrated. Our work expands the design scope of LCE actuators and their potential device applications.
Autor:innen und Institutionen
- National Engineering Laboratory for Textile Fiber Materials and Processing Technology (Zhejiang), School of Materials Science and Engineering, Zhejiang Sci-Tech University, Hangzhou 310018, China.
- Zhejiang Provincial Innovation Center of Advanced Textile Technology, Shaoxing 312000, China.
- State Key Laboratory of Chemical Engineering, College of Chemical and Biological Engineering, Zhejiang University, Hangzhou 310027, China.
- Institute of Emergent Elastomers, School of Materials Science and Engineering, South China University of Technology, Guangzhou 510640, China.
ORCID-Profile: Wenjun Peng, Pengxin Zhao, Xin Liang, Xianming Zhang, Binjie Jin, Guancong Chen, Qian Zhao, Tao Xie
Zitieren
APA
Peng, W., Zhao, P., Zhou, X., Liang, X., Zhang, X., Jin, B., Chen, G., Zhao, Q., & Xie, T. (2024). Pluralizing actuation behavior of 3D printable liquid crystal elastomers via polymerization sequence control. Science Advances, 10(32). https://doi.org/10.1126/sciadv.adp4814
Vancouver
Peng W, Zhao P, Zhou X, Liang X, Zhang X, Jin B, et al. Pluralizing actuation behavior of 3D printable liquid crystal elastomers via polymerization sequence control. Science Advances. 2024;10(32). doi:10.1126/sciadv.adp4814
BibTeX
@article{Peng2024,
author = {Peng, Wenjun and Zhao, Pengxin and Zhou, Xiaorui and Liang, Xin and Zhang, Xianming and Jin, Binjie and Chen, Guancong and Zhao, Qian and Xie, Tao},
title = {Pluralizing actuation behavior of 3D printable liquid crystal elastomers via polymerization sequence control},
journal = {Science Advances},
year = {2024},
volume = {10},
number = {32},
doi = {10.1126/sciadv.adp4814}
}
EUVIMED