Spatially programmed alignment and actuation in printed liquid crystal elastomers
Proceedings of the National Academy of Sciences · 21.01.2025 · 122 (3)
DOI: 10.1073/pnas.2414960122 ↗Kurz gefasst
Fachartikel in der Zeitschrift Proceedings of the National Academy of Sciences, online erschienen am 15.01.2025. Verfasst von Rodrigo Telles und 10 weiteren Autor:innen. Beteiligte Einrichtung: John A. Paulson School of Engineering and Applied Sciences and Wyss Institute for Biologically Inspired Engineering, Harvard University, Cambridge, M…. Die Arbeit wurde bisher 31-mal zitiert (Crossref) und nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: National Science Foundation (NSF), DOD | USA | AFC | CCDC | Army Research Office (ARO), U.S. Department of Energy (DOE).
Abstract (Originalsprache)
Liquid crystal elastomers (LCEs) exhibit reversible shape morphing behavior when cycled above their nematic-to-isotropic transition temperature. During extrusion-based 3D printing, LCE inks are subjected to coupled shear and extensional flows that can be harnessed to spatially control the alignment of their nematic director along prescribed print paths. Here, we combine experiment and modeling to elucidate the effects of ink composition, nozzle geometry, and printing parameters on director alignment. From rheological measurements, we quantify the dimensionless Weissenberg number ( Wi ) for the flow field each ink experiences as a function of printing conditions and demonstrate that Wi is a strong predictor of LCE alignment. We find that director alignment in LCE filaments printed through a tapered nozzle varies radially when Wi < 1, while it is uniform when Wi ≫ 1. Based on COMSOL simulations and in operando X-ray measurements, we show that LCE inks printed through nozzles with an internal hyperbolic geometry exhibit a more uniform director alignment for a given Wi compared to those through tapered nozzles. Concomitantly, the stiffness along the print direction and actuation strain of printed LCEs increases substantially under such conditions. By varying Wi during printing through adjusting the flow rate “on the fly”, LCE architectures with uniform composition, yet locally encoded shape morphing transitions can be realized.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- John A. Paulson School of Engineering and Applied Sciences and Wyss Institute for Biologically Inspired Engineering, Harvard University, Cambridge, MA 02138.
- Complex Scattering Program, National Synchrotron Light Source II, Brookhaven National Laboratory, Upton, NY 11973.
- Materials Engineering Division, Lawrence Livermore National Laboratory, Livermore, CA 94550.
- Department of Chemical and Biological Engineering, Princeton University, Princeton, NJ 08544.
ORCID-Profile: Rodrigo Telles, Guillaume Freychet, Mikhail Zhernenkov, Patryk Wąsik, Benjamin M Yavitt, Ronald Pindak, Jennifer A Lewis
Förderung
- National Science Foundation (NSF)
- DOD | USA | AFC | CCDC | Army Research Office (ARO)
- U.S. Department of Energy (DOE)
Zitieren
APA
Telles, R., Kotikian, A., Freychet, G., Zhernenkov, M., Wąsik, P., Yavitt, B. M., Barrera, J. L., Cook, C. C., Pindak, R., Davidson, E. C., & Lewis, J. A. (2025). Spatially programmed alignment and actuation in printed liquid crystal elastomers. Proceedings of the National Academy of Sciences, 122(3). https://doi.org/10.1073/pnas.2414960122
Vancouver
Telles R, Kotikian A, Freychet G, Zhernenkov M, Wąsik P, Yavitt BM, et al. Spatially programmed alignment and actuation in printed liquid crystal elastomers. Proceedings of the National Academy of Sciences. 2025;122(3). doi:10.1073/pnas.2414960122
BibTeX
@article{Telles2025,
author = {Telles, Rodrigo and Kotikian, Arda and Freychet, Guillaume and Zhernenkov, Mikhail and Wąsik, Patryk and Yavitt, Benjamin M and Barrera, Jorge-Luis and Cook, Caitlyn C and Pindak, Ronald and Davidson, Emily C and Lewis, Jennifer A},
title = {Spatially programmed alignment and actuation in printed liquid crystal elastomers},
journal = {Proceedings of the National Academy of Sciences},
year = {2025},
volume = {122},
number = {3},
doi = {10.1073/pnas.2414960122}
}
EUVIMED