EUVIMEDOpdag EUVIMED
Open access

Multiscale 3D printing via active nozzle size and shape control

Seok Won Kang iD, Jochen Mueller iD

Science Advances · 2024-06-07 · 10 (23)

DOI: 10.1126/sciadv.adn7772 ↗

At a glance

Journal article in Science Advances, published on 2024-06-07. Written by Seok Won Kang and 1 co-authors. Institution: Department of Civil and Systems Engineering, Johns Hopkins University, Baltimore, MD, USA. Cited 67 times so far (Crossref); 41 references. The full text is freely available in PubMed Central.

AbstractBibliografiske oplysningerCiteRelated studies

Abstract (original language)

Three-dimensional (3D) printers extruding filaments through a fixed nozzle encounter a conflict between high resolution, requiring small diameters, and high speed, requiring large diameters. This limitation is especially pronounced in multiscale architectures featuring both bulk and intricate elements. Here, we introduce adaptive nozzle 3D printing (AN3DP), a technique enabling dynamic alteration of nozzle diameter and cross-sectional shape during printing. The AN3DP nozzle consists of eight independently controllable, tendon-driven pins arrayed around a flexible, pressure-resistant membrane. The design incorporates a tapered angle optimized for extruding shear-thinning inks and a pointed tip suitable for constrained-space printing, such as conformal and embedded printing. AN3DP’s efficacy is demonstrated through the fabrication of components with continuous gradients, eliminating the need for discretization, and achieving enhanced density and contour precision compared to traditional 3D printing methods. This platform substantially expands the scope of extrusion-based 3D printers, thus facilitating diverse applications, including bioprinting cell-laden and hierarchical implants with bone-like microarchitecture.

Authors and institutions

  • Department of Civil and Systems Engineering, Johns Hopkins University, Baltimore, MD, USA.

ORCID profiles: Seok Won Kang, Jochen Mueller

Cite

APA

Kang, S. W., & Mueller, J. (2024). Multiscale 3D printing via active nozzle size and shape control. Science Advances, 10(23). https://doi.org/10.1126/sciadv.adn7772

Vancouver

Kang SW, Mueller J. Multiscale 3D printing via active nozzle size and shape control. Science Advances. 2024;10(23). doi:10.1126/sciadv.adn7772

BibTeX
@article{Kang2024,
  author = {Kang, Seok Won and Mueller, Jochen},
  title = {Multiscale 3D printing via active nozzle size and shape control},
  journal = {Science Advances},
  year = {2024},
  volume = {10},
  number = {23},
  doi = {10.1126/sciadv.adn7772}
}
Start for free →