EUVIMEDEUVIMED entdecken
Crossref

Linking yield stress recovery to 3D printability across multiple particle-polymer mixtures, including the role of the additive polyethylene glycol

Chia-Pei Chu, Omkar Roy, Ronald G. Larson

Journal of Rheology · 01.01.2027 · 71 (1)

DOI: 10.1122/8.0001256 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Rheology, online erschienen am 10.11.2026. Verfasst von Chia-Pei Chu und 2 weiteren Autor:innen. Die Arbeit nennt 43 Literaturangaben. Gefördert von: National Science Foundation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A fundamental challenge in direct ink writing (DIW) is identifying a quantitative rheological metric that robustly predicts 3D printability across diverse polymer/particle blends. By characterizing shear rate hysteresis through consecutive up- and down-ramps, we demonstrate that, under the rheological protocol employed in this study, a down-ramp yield stress exceeding approximately 30 Pa reliably predicts successful DIW printing of 20 mm-high slump cones. Beyond the polydimethylsiloxane matrices studied in earlier work, we systematically validate this framework across polyisoprene, polybutadiene, polyethylene glycol (PEG), and poly(ethylene glycol) diglycidyl ether, while expanding the dispersed phase beyond fumed silica to include carbon black and titania. The addition of oligomeric PEG was found to promote rapid thixotropic recovery of the down-ramp yield stress, thereby converting nonprintable suspensions into viable DIW inks for multiple polymer/particle combinations. Additionally, we address the impact of processing history, specifically mixing and degassing, on rheological reproducibility. These findings establish a predictive framework for DIW ink design rooted in the physics of yield stress recovery and demonstrate the transferability of this approach across a broad range of polymer-particle systems for additive manufacturing.

Förderung

  • National Science Foundation

Zitieren

APA

Chu, C., Roy, O., & Larson, R. G. (2027). Linking yield stress recovery to 3D printability across multiple particle-polymer mixtures, including the role of the additive polyethylene glycol. Journal of Rheology, 71(1). https://doi.org/10.1122/8.0001256

Vancouver

Chu C, Roy O, Larson RG. Linking yield stress recovery to 3D printability across multiple particle-polymer mixtures, including the role of the additive polyethylene glycol. Journal of Rheology. 2027;71(1). doi:10.1122/8.0001256

BibTeX
@article{Chu2027,
  author = {Chu, Chia-Pei and Roy, Omkar and Larson, Ronald G.},
  title = {Linking yield stress recovery to 3D printability across multiple particle-polymer mixtures, including the role of the additive polyethylene glycol},
  journal = {Journal of Rheology},
  year = {2027},
  volume = {71},
  number = {1},
  doi = {10.1122/8.0001256}
}
Kostenlos starten →