EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Investigating acoustic effects of violin back arch height changes: Constructing a set of test instruments

Luca Jost, Claudia Fritz iD, Mehmet Ercan Altinsoy, Hannes Vereecke

The Journal of the Acoustical Society of America · 01.11.2026 · 160 (5) · 4149-4160

DOI: 10.1121/10.0047487 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The Journal of the Acoustical Society of America, online erschienen am 11.11.2026. Verfasst von Luca Jost und 3 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Electrical and Computer Engineering, Dresden University of Technology, 01069 Dresden, Germany. Die Arbeit nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The violin is one of the most widely known yet not fully understood cultural objects. Even modern research into its acoustic function has to date generated only limited practically applicable results. This study will evaluate a methodology for producing such results. Six violins were constructed to be as similar as possible, only the parameter “back arch height” was varied. In this way, the dependency of vibratory behavior on this parameter may be studied effectively. The group of six instruments was divided into three pairs with strongly varied arch heights of 12.1, 14.8, and 17.5 mm, respectively. The effectiveness of this method of construction was evaluated chiefly through comparing the residual differences between supposedly identical instruments to the measured differences between purposely different instruments. This was done in terms of geometry and acoustics through CT-scans and radiation measurements. It was found that sufficiently similar instruments could be constructed, so that acoustic outcomes could be documented clearly. Signature body modes of the instruments were shifted apart in frequency and towards higher amplitude for lower back arch heights at average rates of −4.6 Hz mm−1, 1.16 Hz mm−1 and 1.6 dB mm−1, 0.94 dBmm−1 for B1− and B1+ mode attributed peaks, respectively.

Autor:innen und Institutionen

  • Faculty of Electrical and Computer Engineering, Dresden University of Technology, 01069 Dresden, Germany.
  • Institut Jean Le Rond d'Alembert, Sorbonne Université, Centre national de la recherche scientifique, 75005 Paris, France.
  • Westsächsische Hochschule Zwickau, 08056 Zwickau, Germany.

ORCID-Profile: Claudia Fritz

Zitieren

APA

Jost, L., Fritz, C., Altinsoy, M. E., & Vereecke, H. (2026). Investigating acoustic effects of violin back arch height changes: Constructing a set of test instruments. The Journal of the Acoustical Society of America, 160(5), 4149-4160. https://doi.org/10.1121/10.0047487

Vancouver

Jost L, Fritz C, Altinsoy ME, Vereecke H. Investigating acoustic effects of violin back arch height changes: Constructing a set of test instruments. The Journal of the Acoustical Society of America. 2026;160(5):4149-4160. doi:10.1121/10.0047487

BibTeX
@article{Jost2026,
  author = {Jost, Luca and Fritz, Claudia and Altinsoy, Mehmet Ercan and Vereecke, Hannes},
  title = {Investigating acoustic effects of violin back arch height changes: Constructing a set of test instruments},
  journal = {The Journal of the Acoustical Society of America},
  year = {2026},
  volume = {160},
  number = {5},
  pages = {4149--4160},
  doi = {10.1121/10.0047487}
}
Kostenlos starten →