EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Roman coronagraph simulations of exozodi observations in the presence of wavefront errors

Jorge D. Llop-Sayson, Vanessa P. Bailey, Justin Hom, John E. Krist, Bertrand Mennesson, Samantha N. Hasler, Alexandra Z. Greenbaum, A. J. Eldorado Riggs, Geoffrey Bryden

Journal of Astronomical Telescopes, Instruments, and Systems · 22.12.2025 · 11 (04) · 1-17

DOI: 10.1117/1.jatis.11.4.045009 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Astronomical Telescopes, Instruments, and Systems, erschienen am 22.12.2025. Verfasst von Jorge D. Llop-Sayson und 8 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Jet Propulsion Laboratory, California Institute of Technology, National Aeronautics and Space Administration.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The Coronagraph Instrument on board of the Nancy Grace Roman Space Telescope will demonstrate key technologies that will prepare the ground for the Habitable Worlds Observatory. The current predictions for the Roman Coronagraph’s detection limit range from ∼10−8 to a few 10−9, which would allow for groundbreaking science, such as potentially imaging Jupiter-like exoplanets around mature stars or imaging exozodi disks in scattered light. However, the performance of the instrument depends on many factors. Simulating images with varying optical error sources can help us connect instrument and observatory performance to potential science yield. We present a tool, corosims, to simulate observations of arbitrary astrophysical scenes with the Roman Coronagraph in the presence of evolving wavefront errors. This tool wraps around the Roman Coronagraph PROPER diffraction model and detector simulator. We use corosims to investigate the potential degeneracy between jitter-induced speckles and both hot and warm exozodi disk structures. First, we simulate observations of warm exozodi around τ Ceti, with varying jitter levels. We predict that with nominal post-correction pointing jitter performance (∼0.3 mas RMS), the Roman Coronagraph should be sensitive to 12× zodis worth of dust, assuming a face-on (worst case scenario) inclination. We further predict that its sensitivity degrades to 35× zodis if jitter on-target is 3× worse than the nominal value. This estimate assumes the best-modeled wavefront control and stability values from the Roman project, including additional “model uncertainty factors” on performance. We find that, although jitter hinders warm exozodi detection by increasing the noise, jitter residuals are unlikely to result in a false positive, particularly if two-color imaging is conducted. However, if a faint, hot exozodi disk falls

Förderung

  • Jet Propulsion Laboratory, California Institute of Technology
  • National Aeronautics and Space Administration

Zitieren

APA

Llop-Sayson, J. D., Bailey, V. P., Hom, J., Krist, J. E., Mennesson, B., Hasler, S. N., Greenbaum, A. Z., Riggs, A. J. E., & Bryden, G. (2025). Roman coronagraph simulations of exozodi observations in the presence of wavefront errors. Journal of Astronomical Telescopes, Instruments, and Systems, 11(04), 1-17. https://doi.org/10.1117/1.jatis.11.4.045009

Vancouver

Llop-Sayson JD, Bailey VP, Hom J, Krist JE, Mennesson B, Hasler SN, et al. Roman coronagraph simulations of exozodi observations in the presence of wavefront errors. Journal of Astronomical Telescopes, Instruments, and Systems. 2025;11(04):1-17. doi:10.1117/1.jatis.11.4.045009

BibTeX
@article{LlopSayson2025,
  author = {Llop-Sayson, Jorge D. and Bailey, Vanessa P. and Hom, Justin and Krist, John E. and Mennesson, Bertrand and Hasler, Samantha N. and Greenbaum, Alexandra Z. and Riggs, A. J. Eldorado and Bryden, Geoffrey},
  title = {Roman coronagraph simulations of exozodi observations in the presence of wavefront errors},
  journal = {Journal of Astronomical Telescopes, Instruments, and Systems},
  year = {2025},
  volume = {11},
  number = {04},
  pages = {1--17},
  doi = {10.1117/1.jatis.11.4.045009}
}
Kostenlos starten →