EUVIMEDEUVIMED entdecken
Crossref

Al2O3 insertion in ZnO films and its effects on atomic layer etching

Terrick McNealy-James, Maahir Rahi, Barbara Cook, Dylan A. Jeff, Ruthlyn Mangroo, Justin A. Moore, Saiful I. Khondaker, Titel Jurca, Parag Banerjee

Journal of Vacuum Science & Technology A · 01.01.2027 · 45 (1)

DOI: 10.1116/6.0005962 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Vacuum Science & Technology A, online erschienen am 19.11.2026. Verfasst von Terrick McNealy-James und 8 weiteren Autor:innen. Die Arbeit nennt 39 Literaturangaben. Gefördert von: National Science Foundation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Atomic layer etching (ALE) offers angstrom-precision material removal for next-generation device fabrication. However, ALE of technologically important mixed metal oxides remains underexplored relative to binary oxides. Here, we study ALE of Al-doped ZnO (AZO) nanolaminates using sequential acetylacetone (Hacac) and O2-plasma pulses. The AZO is formed as a nanolaminate by inserting cycles of trimethyl aluminum and O2-plasma during ZnO atomic layer deposition. ALE is conducted next without breaking vacuum. In situ spectroscopic ellipsometry shows that the etch-per-cycle (EPC) drops before the etch front reaches the buried Al2O3, indicating that Al3+ diffuses along the film thickness direction. One inserted cycle of Al2O3 (1AZO) slows etching, while two and three cycles (2AZO and 3AZO) act as effective etch-stop layers after 50 ALE cycles. This behavior arises from enhanced Hacac adsorption on Al3+ sites and suppressed formation/desorption of the volatile etch product Al(acac)3, consistent with the higher Al–O bond enthalpy, additional -acac ligands required to etch Al3+, and the higher enthalpy of sublimation of Al(acac)3 compared to Zn(acac)2. X-ray photoelectron spectroscopy shows Al content decreases upon etching of 1AZO but increases for 2AZO and 3AZO corroborating the observations of in situ spectroscopic ellipsometry. ALE of AZO nanolaminates serve as an important system for understanding composition-dependent ALE in mixed oxides.

Förderung

  • National Science Foundation

Zitieren

APA

McNealy-James, T., Rahi, M., Cook, B., Jeff, D. A., Mangroo, R., Moore, J. A., Khondaker, S. I., Jurca, T., & Banerjee, P. (2027). Al2O3 insertion in ZnO films and its effects on atomic layer etching. Journal of Vacuum Science & Technology A, 45(1). https://doi.org/10.1116/6.0005962

Vancouver

McNealy-James T, Rahi M, Cook B, Jeff DA, Mangroo R, Moore JA, et al. Al2O3 insertion in ZnO films and its effects on atomic layer etching. Journal of Vacuum Science & Technology A. 2027;45(1). doi:10.1116/6.0005962

BibTeX
@article{McNealyJames2027,
  author = {McNealy-James, Terrick and Rahi, Maahir and Cook, Barbara and Jeff, Dylan A. and Mangroo, Ruthlyn and Moore, Justin A. and Khondaker, Saiful I. and Jurca, Titel and Banerjee, Parag},
  title = {Al2O3 insertion in ZnO films and its effects on atomic layer etching},
  journal = {Journal of Vacuum Science & Technology A},
  year = {2027},
  volume = {45},
  number = {1},
  doi = {10.1116/6.0005962}
}
Kostenlos starten →