EUVIMEDEUVIMED entdecken
Crossref

Advanced Fabrication of Ultrathin Ruthenium Films Using Synergistic Atomic Layer Deposition and Etching

Jeongbin Lee, Jung-Tae Kim, Jieun Oh, Dongjun Lee, Seo-Hyun Lee, Hyekyung Kim, Jiwoo Oh, Younseon Wang, Woo-Hee Kim iD

Small Methods · 2025-08 · 9 (8)

DOI: 10.1002/smtd.202402166 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Small Methods, online erschienen am 21.03.2025. Verfasst von Jeongbin Lee und 8 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Science and Chemical Engineering, BK21 FOUR ERICA-ACE Center, 55 Hanyangdeahak-ro, Sangnok-gu, Ansan, Gyeonggi, 15588, Republ…. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 36 Literaturangaben. Gefördert von: Ministry of Science and ICT, South Korea, Korea government, Technology Innovation Program.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Atomic‐level surface preparation, using additive and subtractive atomic layer processes, has gradually become crucial for the more active process variations and highly selective process requirements. Precise control of surface roughness and coverage is a critical consideration in the fabrication of metal thin films. Herein, the fabrication of ultrathin, smooth Ru films with a thickness reduced to below 3 nm is reported. This process involves etching back after depositing a thick Ru film using a synergistic combination of atomic layer deposition (ALD) and atomic layer etching (ALE) techniques. The surface smoothing effect, while preserving surface coverage, is validated by initially performing the ALD process for Ru with (ethylbenzyl)(1‐ethyl‐1,4‐cyclohexadienyl)Ru(0) precursor and O 2 gas, followed by the ALE process with 2,4‐pentanedione and O 2 radicals. Under optimized conditions for atomically flat Ru surfaces, the surface quality of Ru films processed by ALD, and the combined ALD/ALE methods are compared. Consequently, it is demonstrated for the first time that the combined ALD/ALE process effectively reduces both thickness and asperities while smoothing the surface and maintaining nearly complete surface coverage down to the ≈1 nm scale. This approach enables the production of advanced electronic devices with precise control over surface properties at the Ångström level.

Schlagwörter

Stichwörter der Autor:innen

atomic layer etchingatomic level processinghollow cathode plasmasurface roughness controlultrathin metal film

Autor:innen und Institutionen

  • Department of Materials Science and Chemical Engineering, BK21 FOUR ERICA-ACE Center, 55 Hanyangdeahak-ro, Sangnok-gu, Ansan, Gyeonggi, 15588, Republic of Korea.
  • Mechatronics Research, Samsung Electronics, Hwaseong, Gyeonggi, 18448, Republic of Korea.

ORCID-Profile: Woo-Hee Kim

Förderung

  • Ministry of Science and ICT, South Korea
  • Korea government
  • Technology Innovation Program
  • Ministry of Trade, Industry & Energy
  • Korea Institute for Advancement of Technology

Zitieren

APA

Lee, J., Kim, J. T., Oh, J., Lee, D., Lee, S. H., Kim, H., Oh, J., Wang, Y., & Kim, W. H. (2025). Advanced Fabrication of Ultrathin Ruthenium Films Using Synergistic Atomic Layer Deposition and Etching. Small Methods, 9(8). https://doi.org/10.1002/smtd.202402166

Vancouver

Lee J, Kim JT, Oh J, Lee D, Lee SH, Kim H, et al. Advanced Fabrication of Ultrathin Ruthenium Films Using Synergistic Atomic Layer Deposition and Etching. Small Methods. 2025;9(8). doi:10.1002/smtd.202402166

BibTeX
@article{Lee2025,
  author = {Lee, Jeongbin and Kim, Jung-Tae and Oh, Jieun and Lee, Dongjun and Lee, Seo-Hyun and Kim, Hyekyung and Oh, Jiwoo and Wang, Younseon and Kim, Woo-Hee},
  title = {Advanced Fabrication of Ultrathin Ruthenium Films Using Synergistic Atomic Layer Deposition and Etching},
  journal = {Small Methods},
  year = {2025},
  volume = {9},
  number = {8},
  doi = {10.1002/smtd.202402166}
}
Kostenlos starten →