EUVIMEDEUVIMED entdecken
Crossref

Enhancing chemical vapor deposition growth and fabrication techniques to maximize hole conduction in tungsten diselenide for monolithic CMOS integration

Jatin Vikram Singh, Matthew N. Disiena, S. S. Teja Nibhanupudi, Nicholas T. Watanabe, JaeHyun Ahn, Dong-Won Kim, Anupam Roy, Sanjay K. Banerjee

Journal of Vacuum Science & Technology A · 01.03.2025 · 43 (2)

DOI: 10.1116/6.0003893 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Vacuum Science & Technology A, online erschienen am 13.02.2025. Verfasst von Jatin Vikram Singh und 7 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 55 Literaturangaben. Gefördert von: Science and Engineering Research Board.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Tungsten diselenide, WSe2, is attractive as a channel material for p-channel metal–oxide–semiconductor field effect transistors (PMOSFETs) using transition metal dichalcogenide (TMD) nanosheets for ultimate CMOS scaling. For practical applications, it is necessary to demonstrate good quality devices on as-grown, large-area chemical vapor deposition (CVD) grown TMD films, rather than on small, exfoliated flakes from bulk crystals, and without requiring transfers to secondary substrates. This article reports on the growth optimization of large-area WSe2 and efforts to achieve higher hole conduction, which is more challenging than electron conduction since most TMDs tend to be n-type due to defects. Achieving low contact resistance and high drive currents is vital, but the intrinsic defects within the grown material dominate the carrier mobilities and effectively make TMDs more n-type due to chalcogen vacancies in devices fabricated at high temperatures. We have, therefore, developed salt-assisted growth strategies at different growth temperatures using atmospheric pressure CVD (APCVD). Furthermore, we identified optimal APCVD growth and PMOSFET fabrication recipes to achieve high hole conduction. With growth and fabrication optimization, we can achieve drive currents of 10 μA/μm in back-gated PMOSFETs at Vd = −2 V in as-grown WSe2, akin to their exfoliation-based counterparts. We also have seen evidence of both hole and electron ambipolar conduction even with high work function source/drain contact metals, signifying that contact engineering will be vital to suppress the electron branch and improve hole conduction.

Förderung

  • Science and Engineering Research Board

Zitieren

APA

Singh, J. V., Disiena, M. N., Nibhanupudi, S. S. T., Watanabe, N. T., Ahn, J., Kim, D., Roy, A., & Banerjee, S. K. (2025). Enhancing chemical vapor deposition growth and fabrication techniques to maximize hole conduction in tungsten diselenide for monolithic CMOS integration. Journal of Vacuum Science & Technology A, 43(2). https://doi.org/10.1116/6.0003893

Vancouver

Singh JV, Disiena MN, Nibhanupudi SST, Watanabe NT, Ahn J, Kim D, et al. Enhancing chemical vapor deposition growth and fabrication techniques to maximize hole conduction in tungsten diselenide for monolithic CMOS integration. Journal of Vacuum Science & Technology A. 2025;43(2). doi:10.1116/6.0003893

BibTeX
@article{Singh2025,
  author = {Singh, Jatin Vikram and Disiena, Matthew N. and Nibhanupudi, S. S. Teja and Watanabe, Nicholas T. and Ahn, JaeHyun and Kim, Dong-Won and Roy, Anupam and Banerjee, Sanjay K.},
  title = {Enhancing chemical vapor deposition growth and fabrication techniques to maximize hole conduction in tungsten diselenide for monolithic CMOS integration},
  journal = {Journal of Vacuum Science & Technology A},
  year = {2025},
  volume = {43},
  number = {2},
  doi = {10.1116/6.0003893}
}
Kostenlos starten →