EUVIMEDEUVIMED entdecken
Crossref

Retaining Hole Conduction Using a Germanium Seed Layer for High- k HfO2 ALD on Salt-Assisted APCVD Tungsten Diselenide

Jatin Vikram Singh, Akshar Venkata Chunduri, Nicholas T. Watanabe, Matthew N. Disiena, JaeHyun Ahn, Anupam Roy, Dong-Won Kim, Keunhwi Cho, Sanjay K. Banerjee

ACS Applied Electronic Materials · 05.11.2026

DOI: 10.1021/acsaelm.6c01643 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Electronic Materials, online erschienen am 05.11.2026. Verfasst von Jatin Vikram Singh und 8 weiteren Autor:innen. Die Arbeit nennt 65 Literaturangaben. Gefördert von: Samsung.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Tungsten diselenide (WSe2) is the leading p-type channel candidate for two-dimensional complementary field effect transistors (CFETs). However, depositing high-k gate dielectric on its inert basal plane has still been a challenge. Modified atomic layer deposition (ALD) chemistries to avoid unintentional doping, plasma surface treatments, and interfacial seed layers are among a few promising methods for high-k integration. Extensive studies have been done on molybdenum disulfide (MoS2) to identify possible routes to high-performance NFET. This study presents a possible route to integrating high-k HfO2 on salt-assisted atmospheric pressure chemical vapor deposition (SA-CVD)-grown WSe2 on Si/SiO2 wafers. We compare evaporated Hf, Ti, and Ge seed layers, oxidized in ambient, prior to high-k ALD on SA-CVD WSe2. Because salt-assisted growths bind defect density to local precursor flux, plasma-based surface treatments can damage or modify the underlying channel material, making seed layers a favorable option over plasma processes. ALD without any seed layer suppresses the hole branch of both exfoliated and CVD WSe2 transistors, where peak drive currents were lowered by roughly six orders of magnitude. Seedless HfO2 ALD, Hf and Ti seeds eliminate hole conduction below 0.5 nA/μm. Germanium is the only one of the three seeds that we study that preserves the hole branch, at least at the level of an unseeded reference device at equal gate overdrive, and shows a +40 V threshold voltage shift, making the device hole dominant. Therefore, Ge is a promising seed for retaining hole conduction in WSe2 PFETs, and the seed-ALD high-k HfO2 is a possible dielectric stack for top-gated PFETs.

Förderung

  • Samsung

Zitieren

APA

Singh, J. V., Chunduri, A. V., Watanabe, N. T., Disiena, M. N., Ahn, J., Roy, A., Kim, D., Cho, K., & Banerjee, S. K. (2026). Retaining Hole Conduction Using a Germanium Seed Layer for High- k HfO2 ALD on Salt-Assisted APCVD Tungsten Diselenide. ACS Applied Electronic Materials. https://doi.org/10.1021/acsaelm.6c01643

Vancouver

Singh JV, Chunduri AV, Watanabe NT, Disiena MN, Ahn J, Roy A, et al. Retaining Hole Conduction Using a Germanium Seed Layer for High- k HfO2 ALD on Salt-Assisted APCVD Tungsten Diselenide. ACS Applied Electronic Materials. 2026. doi:10.1021/acsaelm.6c01643

BibTeX
@article{Singh2026,
  author = {Singh, Jatin Vikram and Chunduri, Akshar Venkata and Watanabe, Nicholas T. and Disiena, Matthew N. and Ahn, JaeHyun and Roy, Anupam and Kim, Dong-Won and Cho, Keunhwi and Banerjee, Sanjay K.},
  title = {Retaining Hole Conduction Using a Germanium Seed Layer for High- k HfO2 ALD on Salt-Assisted APCVD Tungsten Diselenide},
  journal = {ACS Applied Electronic Materials},
  year = {2026},
  doi = {10.1021/acsaelm.6c01643}
}
Kostenlos starten →