EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mechanics of Cone-on-Cone Friction on 3D-Printed Conical Surfaces Fabricated Via Polymer Jetting

Shujing Dong, Lin Gu, Yaning Li

Journal of Applied Mechanics · 01.12.2026 · 93 (12)

DOI: 10.1115/1.4072744 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Applied Mechanics, online erschienen am 23.10.2026. Verfasst von Shujing Dong und 2 weiteren Autor:innen. Die Arbeit nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Directorate for Engineering, National Science Foundation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Understanding and controlling friction in additively manufactured surfaces is critical for optimizing component performance. For polymer-jet 3D-printed surfaces, the coupled effects of geometry, surface topology, and loading conditions on friction behavior remain underexplored. To quantify the frictional characteristics of 3D-printed surfaces, this study employs an integrated experimental and computational approach using custom-designed rotational tests on ring-on-ring (R-R) and cone-on-cone (C-C) geometries. The C-C type uses variable conical angles to investigate their effects on surface topology and the coefficient of friction (COF). Results reveal that the COF exhibits a strong dependence on conical angles, with distinct frictional behaviors across configurations. The effects of normal force and angular velocity were also characterized, revealing pronounced stick-slip fluctuations at lower normal forces, especially for the 0 deg configuration. Surface topology, featuring circular and parallel patterns, was further analyzed through finite element (FE) simulations to quantify its influence on frictional response. The COF fluctuations persist for parallel patterns across all amplitudes but only manifest in circular patterns at larger amplitudes. While R-R assemblies exhibit lower mean shear stress and lack optimal uniformity, C-C assemblies with small conical angles (2 deg and 5 deg) exhibit relatively uniform shear stress distribution. These findings advance the fundamental understanding of friction in polymer-jetted surfaces and support the design of tailored surface geometries for improved tribological performance in additive manufacturing.

Förderung

  • Directorate for Engineering
  • National Science Foundation

Zitieren

APA

Dong, S., Gu, L., & Li, Y. (2026). Mechanics of Cone-on-Cone Friction on 3D-Printed Conical Surfaces Fabricated Via Polymer Jetting. Journal of Applied Mechanics, 93(12). https://doi.org/10.1115/1.4072744

Vancouver

Dong S, Gu L, Li Y. Mechanics of Cone-on-Cone Friction on 3D-Printed Conical Surfaces Fabricated Via Polymer Jetting. Journal of Applied Mechanics. 2026;93(12). doi:10.1115/1.4072744

BibTeX
@article{Dong2026,
  author = {Dong, Shujing and Gu, Lin and Li, Yaning},
  title = {Mechanics of Cone-on-Cone Friction on 3D-Printed Conical Surfaces Fabricated Via Polymer Jetting},
  journal = {Journal of Applied Mechanics},
  year = {2026},
  volume = {93},
  number = {12},
  doi = {10.1115/1.4072744}
}
Kostenlos starten →