EUVIMEDEUVIMED entdecken
Crossref

Numerical Analysis of Sand-Induced Erosion in a Transonic Axial Compressor Rotor Under Varying Particle Sizes

Xiaowen Xuan, Jichao Li, Shuzi Yang, Caifeng Zhang, Boning Fan, Xiaoyu Zhang, Hongwu Zhang, Junqiang Zhu

Journal of Turbomachinery · 01.12.2026 · 148 (12)

DOI: 10.1115/1.4072656 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Turbomachinery, online erschienen am 17.09.2026. Verfasst von Xiaowen Xuan und 7 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 20 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Beijing Municipality.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

During operation in sand-laden environments, aero-engine compressor blades suffer severe localized erosion, leading to progressive degradation of compressor stage performance over the engine service life. This issue is particularly critical for high-speed transonic compressor rotors. In this study, the erosion behavior of a transonic axial-flow compressor rotor is investigated using a computational fluid dynamics (CFD)-based erosion-prediction framework. Five representative particle diameters are selected based on the particle-size distribution measured at the outlet of the upstream inlet duct. Three engineering-relevant particle mass loadings are prescribed through an accelerated loading approach. Under identical operating conditions, blade erosion patterns and surface aerodynamic responses are compared between clean and sand-laden inflow cases. The results show that the erosion level on the suction surface is approximately one order of magnitude lower than that on the pressure surface, and the suction-surface erosion appears as scattered spot-like patches. Within the considered loading range, smaller particles produce lower erosion-rate densities but cause stronger flow-field disturbances, whereas larger particles show the opposite behavior. As particle concentration increases, the contribution of particles to the radial variation of leading-edge erosion-rate density increases by several times. Large particles mainly promote localized material removal and blade geometric degradation. Overall, these findings clarify the erosion–aerodynamic coupling characteristics of a transonic compressor rotor under different particle sizes and concentrations, and provide practical guidance for compressor design and protection in sand-laden environments.

Förderung

  • National Natural Science Foundation of China
  • Natural Science Foundation of Beijing Municipality

Zitieren

APA

Xuan, X., Li, J., Yang, S., Zhang, C., Fan, B., Zhang, X., Zhang, H., & Zhu, J. (2026). Numerical Analysis of Sand-Induced Erosion in a Transonic Axial Compressor Rotor Under Varying Particle Sizes. Journal of Turbomachinery, 148(12). https://doi.org/10.1115/1.4072656

Vancouver

Xuan X, Li J, Yang S, Zhang C, Fan B, Zhang X, et al. Numerical Analysis of Sand-Induced Erosion in a Transonic Axial Compressor Rotor Under Varying Particle Sizes. Journal of Turbomachinery. 2026;148(12). doi:10.1115/1.4072656

BibTeX
@article{Xuan2026,
  author = {Xuan, Xiaowen and Li, Jichao and Yang, Shuzi and Zhang, Caifeng and Fan, Boning and Zhang, Xiaoyu and Zhang, Hongwu and Zhu, Junqiang},
  title = {Numerical Analysis of Sand-Induced Erosion in a Transonic Axial Compressor Rotor Under Varying Particle Sizes},
  journal = {Journal of Turbomachinery},
  year = {2026},
  volume = {148},
  number = {12},
  doi = {10.1115/1.4072656}
}
Kostenlos starten →