EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Reconstruction and Reduction of Realistic Manufacturing Error Field for Uncertainty Quantification of Transonic Axial Compressor Rotor

Benrui Zhang, Yaping Ju, Zhen Li, Xiawen Zhang, Yiming Liu, Chuhua Zhang

Journal of Turbomachinery · 01.01.2026 · 148 (1)

DOI: 10.1115/1.4069132 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Turbomachinery, online erschienen am 24.07.2025. Verfasst von Benrui Zhang und 5 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Turbo compressors are inevitably subject to geometric and operational uncertainties that could induce performance degradations. This vulnerability is particularly pronounced in transonic compressor rotors due to the presence of sharp shock waves, which are highly susceptible to uncertainties. While the importance of uncertainty quantification (UQ) of compressors during the design phase has received growing recognition, the existing methodologies still face a grand challenge in modeling the geometric uncertainties related to manufacturing error fields. To address this challenge, we first propose an accurate geometric reconstruction method of realistic manufacturing error fields, in which kernel density estimation and correlation constraint sampling are combined to reconstruct manufacturing error fields with arbitrary probability distributions and geometric correlations. Then, a bilayer and bidirection dimension reduction method is proposed to treat the reconstructed model for reduced input uncertainties. The proposed methods are verified and validated by multipoint UQ of the well-known axial compressor rotor, i.e., NASA Rotor 37, under multisource uncertainties from blade manufacturing error fields as well as the total pressure, total temperature, and turbulence intensity of the incoming flow. From the statistics of 126 high-quality blades, each with 600 measurement points, it is confirmed that a large portion obey arbitrary probabilistic distributions rather than Gaussian distributions, and strong spatial correlations exist across the blade manufacturing error field. Both characteristics can be accurately reconstructed through the combination of kernel density estimation and correlation constraint sampling methods. Moreover, the bilayer and bidirection dimension reduction method is capable of reducing the dimensionality of manufacturing error field to 2–17 for Rotor 37, depending on the working points and performance parameters. The UQ results of Rotor 37 indicate that the geometric and operational uncertainties are mainly responsible for the mean offset and scatter of rotor performance variations, respectively. The geometric uncertainties due to manufacturing errors exert a negative impact on rotor performance, especially at near-stall point, manifested by increased suction-surface separation flow losses due to the forward shift of the shock wave. The proposed method in this work is quite generic and can be used in UQ and robust aerodynamic design optimization of turbomachinery components.

Zitieren

APA

Zhang, B., Ju, Y., Li, Z., Zhang, X., Liu, Y., & Zhang, C. (2026). Reconstruction and Reduction of Realistic Manufacturing Error Field for Uncertainty Quantification of Transonic Axial Compressor Rotor. Journal of Turbomachinery, 148(1). https://doi.org/10.1115/1.4069132

Vancouver

Zhang B, Ju Y, Li Z, Zhang X, Liu Y, Zhang C. Reconstruction and Reduction of Realistic Manufacturing Error Field for Uncertainty Quantification of Transonic Axial Compressor Rotor. Journal of Turbomachinery. 2026;148(1). doi:10.1115/1.4069132

BibTeX
@article{Zhang2026,
  author = {Zhang, Benrui and Ju, Yaping and Li, Zhen and Zhang, Xiawen and Liu, Yiming and Zhang, Chuhua},
  title = {Reconstruction and Reduction of Realistic Manufacturing Error Field for Uncertainty Quantification of Transonic Axial Compressor Rotor},
  journal = {Journal of Turbomachinery},
  year = {2026},
  volume = {148},
  number = {1},
  doi = {10.1115/1.4069132}
}
Kostenlos starten →