Turbulent Heat Transfer in Lattice-Structured Matrix Cooling Channels
Journal of Turbomachinery · 01.12.2026 · 148 (12)
DOI: 10.1115/1.4072655 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Turbomachinery, online erschienen am 17.09.2026. Verfasst von Himani Garg und 3 weiteren Autor:innen. Die Arbeit nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Crafoordska Stiftelsen, VINNOVA.
Abstract (Originalsprache)
Matrix cooling is an internal cooling concept for gas-turbine blades that combines structural reinforcement with enhanced heat transfer through a rib-crossing lattice geometry. The repeated flow redirection generates strong shear layers, impingement, and vortical structures that significantly influence turbulent transport and heat transfer. This study presents a numerical investigation of turbulent flow and heat transfer in a lattice-structured matrix cooling channel using Reynolds-averaged Navier–Stokes (RANS) and large-eddy simulation (LES) approaches, validated against experimental data at Re = 24,100. Steady RANS simulations are performed using k−ω, k−ω SST, realizable k−ϵ, and Launder–Sharma k−ϵ models. The RANS results reproduce global trends of heat transfer and pressure drop, with area-averaged heat transfer coefficients predicted within approximately ±3% of the experimental value, while showing limited capability in resolving local heat transfer variations. LES computations are conducted using several subgrid-scale (SGS) models, including wall-adapting local eddy viscosity, one-equation eddy viscosity, Smagorinsky, and the localized dynamic k-equation model. A mesh-refinement study demonstrates that increasing grid resolution improves LES accuracy, reducing the discrepancy in area-averaged heat transfer from more than 25% on coarse meshes to approximately 5–8% on fine and very-fine meshes. The choice of SGS model significantly affects heat transfer predictions, whereas pressure drop remains comparatively insensitive. The results quantify the tradeoff between predictive accuracy and computational cost and provide guidance for selecting turbulence modeling strategies for engineering analysis of matrix cooling configurations.
Förderung
- Crafoordska Stiftelsen
- VINNOVA
Zitieren
APA
Garg, H., Seppey, R., Mihaescu, M., & Fureby, C. (2026). Turbulent Heat Transfer in Lattice-Structured Matrix Cooling Channels. Journal of Turbomachinery, 148(12). https://doi.org/10.1115/1.4072655
Vancouver
Garg H, Seppey R, Mihaescu M, Fureby C. Turbulent Heat Transfer in Lattice-Structured Matrix Cooling Channels. Journal of Turbomachinery. 2026;148(12). doi:10.1115/1.4072655
BibTeX
@article{Garg2026,
author = {Garg, Himani and Seppey, Romain and Mihaescu, Mihai and Fureby, Christer},
title = {Turbulent Heat Transfer in Lattice-Structured Matrix Cooling Channels},
journal = {Journal of Turbomachinery},
year = {2026},
volume = {148},
number = {12},
doi = {10.1115/1.4072655}
}
EUVIMED