EUVIMEDEUVIMED entdecken
Crossref

Heat Transfer and Pressure Loss of Additively Manufactured Internal Cooling Channels With Various Shapes

Alexander J. Wildgoose, Karen A. Thole

Journal of Turbomachinery · 01.07.2023 · 145 (7)

DOI: 10.1115/1.4056775 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Turbomachinery, online erschienen am 10.02.2023. Verfasst von Alexander J. Wildgoose und 1 weiteren Autor:innen. Die Arbeit wurde bisher 25-mal zitiert (Crossref) und nennt 35 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Additive manufacturing (AM) provides the ability to fabricate highly customized internal cooling passages that are relevant to gas turbine components. This experimental study examines the pressure loss and heat transfer performance of a range of fundamental channel shapes that were produced using direct metal laser sintering. Circular, hexagonal, pentagonal, elliptical, diamond, square, rectangular, trapezoidal, and triangular channel cross sections were investigated. To maintain the same convective surface area between shapes, the wetted perimeters of the channel cross sections were kept constant. Parallel computational fluid dynamic simulations were performed to understand the relationships in cooling performance between several channel shapes. Several characteristic length scales were evaluated to scale the pressure loss and heat transfer measurements. Among the channel shapes investigated, the diamond channel showed the lowest Nusselt number and friction factor. The pentagon exhibited a similar Nusselt number as the circular channel despite having a lower friction factor. There was no difference in scaling the friction factor or Nusselt number results of the different channel shapes between using the square root of cross-sectional area compared to hydraulic diameter as the characteristic length scale

Zitieren

APA

Wildgoose, A. J., & Thole, K. A. (2023). Heat Transfer and Pressure Loss of Additively Manufactured Internal Cooling Channels With Various Shapes. Journal of Turbomachinery, 145(7). https://doi.org/10.1115/1.4056775

Vancouver

Wildgoose AJ, Thole KA. Heat Transfer and Pressure Loss of Additively Manufactured Internal Cooling Channels With Various Shapes. Journal of Turbomachinery. 2023;145(7). doi:10.1115/1.4056775

BibTeX
@article{Wildgoose2023,
  author = {Wildgoose, Alexander J. and Thole, Karen A.},
  title = {Heat Transfer and Pressure Loss of Additively Manufactured Internal Cooling Channels With Various Shapes},
  journal = {Journal of Turbomachinery},
  year = {2023},
  volume = {145},
  number = {7},
  doi = {10.1115/1.4056775}
}
Kostenlos starten →