Adaptive Stability Control of a High-Speed Axial Flow Fan Under Circumferential Distortion Inlet Conditions
Journal of Turbomachinery · 01.09.2026 · 148 (9)
DOI: 10.1115/1.4072311 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Turbomachinery, online erschienen am 20.08.2026. Verfasst von Boning Fan und 5 weiteren Autor:innen. Die Arbeit nennt 33 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Beijing Municipality.
Abstract (Originalsprache)
Adaptive stability control is experimentally studied in a high-speed axial-flow fan of an aero-engine under circumferential distortion conditions. A moveable baffle is used to simulate the circumferentially distorted inflow with a comprehensive distortion index of 9%, which is explicitly specified in airworthiness regulations. Experimental results indicate that the above distorted inflow leads to compressor performance degradation and reduces the stall margin (SM) significantly by 8.81% at design speed. To prevent its adverse impacts on SM, an adaptive stability control system is devised for a high-speed axial-flow fan. First, although the distorted inflow alters the instability route, the cross-correlation analysis can still be successfully validated for early stall warning; it can serve as the feedback signal input for the control system, which senses the stall warning signal in real time via the casing wall pressure sensors. Second, tip air injection can effectively weaken the forward movement of the leading-edge shock wave and tip leakage vortex downstream of the distortion region along the rotor rotational direction, thereby delaying the stall onset under distorted inflow conditions. Moreover, the tip air injection can increase the correlation coefficient, enabling the establishment of the correlation between the stability-enhancing parameter and stall warning signal. Finally, the adaptive control experiments are conducted. Once the warning threshold is triggered, the feedback signal automatically regulates the opening of the proportional valve, and tip air injection is activated to delay stall occurrence. Under circumferentially distorted inflow conditions, the adaptive stability control strategy can successfully improve the SM by 8.45% and 9.31% at 100% and 80% design speed, respectively, with no penalty in the peak efficiency. The achieved stall margin improvement (SMI) is comparable to that of steady injection with constant mass flow, while the injection energy consumption is reduced by approximately 40%. This study verifies the feasibility of the adaptive stability control strategy based on cross-correlation algorithms and tip air injection for high-speed axial compressors under distorted inflow conditions and offers a valuable reference for potential engineering applications.
Förderung
- National Natural Science Foundation of China
- Natural Science Foundation of Beijing Municipality
Zitieren
APA
Fan, B., Li, J., Liang, C., Wang, W., Zhang, H., & Zhu, J. (2026). Adaptive Stability Control of a High-Speed Axial Flow Fan Under Circumferential Distortion Inlet Conditions. Journal of Turbomachinery, 148(9). https://doi.org/10.1115/1.4072311
Vancouver
Fan B, Li J, Liang C, Wang W, Zhang H, Zhu J. Adaptive Stability Control of a High-Speed Axial Flow Fan Under Circumferential Distortion Inlet Conditions. Journal of Turbomachinery. 2026;148(9). doi:10.1115/1.4072311
BibTeX
@article{Fan2026,
author = {Fan, Boning and Li, Jichao and Liang, Cheng and Wang, Wentao and Zhang, Hongwu and Zhu, Junqiang},
title = {Adaptive Stability Control of a High-Speed Axial Flow Fan Under Circumferential Distortion Inlet Conditions},
journal = {Journal of Turbomachinery},
year = {2026},
volume = {148},
number = {9},
doi = {10.1115/1.4072311}
}
EUVIMED