Effect of radial inlet distortion on aerodynamic stability in a high load axial flow compressor
Physics of Fluids · 01.10.2024 · 36 (10)
DOI: 10.1063/5.0235393 ↗Kurz gefasst
Fachartikel in der Zeitschrift Physics of Fluids, online erschienen am 18.10.2024. Verfasst von Zhonggang Fan und 5 weiteren Autor:innen. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 41 Literaturangaben. Gefördert von: National Science and Technology Major Project, National Natural Science Foundation of China.
Abstract (Originalsprache)
Radial inlet distortion induced by boundary layer separation can significantly affect the aerodynamic performance of the compressor. The effect of radial inlet distortion on the flow structure is numerically investigated in a high load axial flow compressor. The inlet boundary is determined by the experimental results at the downstream of the distortion generator. The results reveal that tip distortion leads to a reduction in the stall margin, whereas hub distortion extends it. Radial distortion redistributes the main flow toward undistorted region due to the obstructive effect of lattice ring. The deficit in axial velocity with tip radial distortion causes the rotor to operate at a higher incidence angle near the casing, while hub radial distortion alleviates the tip blade loading. The detailed three-dimensional flow field analysis indicates that increased blade loading with tip distortion shifts the trajectories of both primary and secondary tip leakage flow toward the leading edge, thereby expanding the blockage region. Conversely, hub radial distortion unloads the rotor tip region, thereby reducing the blockage region induced by tip leakage flow. Additionally, with hub distortion, the location of separation line on the blade suction surface moves closer to the leading edge, and the flow separation around the trailing edge is intensified.
Förderung
- National Science and Technology Major Project
- National Natural Science Foundation of China
Zitieren
APA
Fan, Z., Liu, Y., Ba, D., Xu, X., Zhang, M., & Du, J. (2024). Effect of radial inlet distortion on aerodynamic stability in a high load axial flow compressor. Physics of Fluids, 36(10). https://doi.org/10.1063/5.0235393
Vancouver
Fan Z, Liu Y, Ba D, Xu X, Zhang M, Du J. Effect of radial inlet distortion on aerodynamic stability in a high load axial flow compressor. Physics of Fluids. 2024;36(10). doi:10.1063/5.0235393
BibTeX
@article{Fan2024,
author = {Fan, Zhonggang and Liu, Yang and Ba, Dun and Xu, Xiaobin and Zhang, Min and Du, Juan},
title = {Effect of radial inlet distortion on aerodynamic stability in a high load axial flow compressor},
journal = {Physics of Fluids},
year = {2024},
volume = {36},
number = {10},
doi = {10.1063/5.0235393}
}
EUVIMED