EUVIMEDEUVIMED entdecken
Crossref

A Two-Step Calibration Method for Industrial Robots to Improve Positioning Accuracy Under External Payloads

Tao Ling, Xu Zhang, Dawei Tu, Xianpeng Zhang

Journal of Mechanisms and Robotics · 01.07.2026 · 18 (7)

DOI: 10.1115/1.4072117 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Mechanisms and Robotics, online erschienen am 22.06.2026. Verfasst von Tao Ling und 3 weiteren Autor:innen. Die Arbeit nennt 27 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Accurate positioning of robot end effectors is essential for many industrial applications. Conventional robot calibration methods primarily identify deviations in kinematic parameters. At the same time, complex nonkinematic errors, such as those caused by structural deformation and varying external payloads, are often neglected, resulting in reduced positioning accuracy. To address this issue, this article proposes a two-step calibration method to improve robot positioning accuracy under external payloads. The method is developed based on the modified Denavit–Hartenberg (MDH) model and incorporates a data-driven error estimation strategy. In the first step, a convolutional neural network (CNN) predicts the positioning error of the robot end-effector under no-load conditions. In the second step, a dual-branch convolutional neural network with an attention mechanism (DB-CNN-AM) estimates the additional positioning error induced by varying payloads. The predicted errors are combined and compensated within the MDH-based model to obtain corrected target positions. Experiments on a TB6-R10 industrial robot demonstrate the effectiveness of the proposed method. When the external payload is less than 7 kg, the maximum positioning error is reduced from 4.197 mm to 0.240 mm, and the average error decreases from 1.792 mm to 0.096 mm, corresponding to a reduction of 94.64%.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Ling, T., Zhang, X., Tu, D., & Zhang, X. (2026). A Two-Step Calibration Method for Industrial Robots to Improve Positioning Accuracy Under External Payloads. Journal of Mechanisms and Robotics, 18(7). https://doi.org/10.1115/1.4072117

Vancouver

Ling T, Zhang X, Tu D, Zhang X. A Two-Step Calibration Method for Industrial Robots to Improve Positioning Accuracy Under External Payloads. Journal of Mechanisms and Robotics. 2026;18(7). doi:10.1115/1.4072117

BibTeX
@article{Ling2026,
  author = {Ling, Tao and Zhang, Xu and Tu, Dawei and Zhang, Xianpeng},
  title = {A Two-Step Calibration Method for Industrial Robots to Improve Positioning Accuracy Under External Payloads},
  journal = {Journal of Mechanisms and Robotics},
  year = {2026},
  volume = {18},
  number = {7},
  doi = {10.1115/1.4072117}
}
Kostenlos starten →