EUVIMEDEUVIMED entdecken
Crossref

Gravity Compensation for Variable Payloads Using Slider-Guided Compression Springs

Addisu Kidanemariam Tadese, Vu Linh Nguyen, Brijesh Patel, Po Ting Lin

Journal of Mechanisms and Robotics · 01.07.2026 · 18 (7)

DOI: 10.1115/1.4072070 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Mechanisms and Robotics, online erschienen am 12.06.2026. Verfasst von Addisu Kidanemariam Tadese und 3 weiteren Autor:innen. Die Arbeit nennt 56 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Gravity compensation is crucial for improving the energy efficiency of robotic systems, but achieving static balancing with variable payloads remains a design challenge. This article proposes a gravity compensation mechanism for variable payloads (GCVPs), designed for static balancing of variable payloads over a full range of motion. The GCVP integrates a slider, a pair of compression springs, and an adjustable pivot pin. Variable compensation is achieved by modulating the pivot radial position inside the slider to alter the stored energy in the springs without changing their stiffness parameters. The design methodology employs the potential energy conservation and virtual work principles to formulate the spring stiffness independent of the angular position of the payload. Numerical and experimental tests were used to show the performance of the GCVP. Numerical simulations demonstrate a torque reduction of up to 98.4%. Furthermore, experimental validation under variable loading (0.5–2 kg) shows a reduction in the peak torque from 1.29 N m to 0.16 N m (for 0.5 kg load) and from 4.61 N m to 0.51 N m (for 2 kg load). Similar reductions for intermediate loads were also observed, resulting in a maximum balancing efficiency of 90.05%.

Zitieren

APA

Tadese, A. K., Nguyen, V. L., Patel, B., & Lin, P. T. (2026). Gravity Compensation for Variable Payloads Using Slider-Guided Compression Springs. Journal of Mechanisms and Robotics, 18(7). https://doi.org/10.1115/1.4072070

Vancouver

Tadese AK, Nguyen VL, Patel B, Lin PT. Gravity Compensation for Variable Payloads Using Slider-Guided Compression Springs. Journal of Mechanisms and Robotics. 2026;18(7). doi:10.1115/1.4072070

BibTeX
@article{Tadese2026,
  author = {Tadese, Addisu Kidanemariam and Nguyen, Vu Linh and Patel, Brijesh and Lin, Po Ting},
  title = {Gravity Compensation for Variable Payloads Using Slider-Guided Compression Springs},
  journal = {Journal of Mechanisms and Robotics},
  year = {2026},
  volume = {18},
  number = {7},
  doi = {10.1115/1.4072070}
}
Kostenlos starten →