Dynamic Recrystallization in Laser Impact Welding Driven by Surface Morphology
Journal of Manufacturing Science and Engineering · 01.08.2026 · 148 (8)
DOI: 10.1115/1.4072053 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Manufacturing Science and Engineering, online erschienen am 17.06.2026. Verfasst von Al-Mustasin Abir Hossain und 1 weiteren Autor:innen. Die Arbeit nennt 53 Literaturangaben.
Abstract (Originalsprache)
Laser impact welding (LIW) is a high-speed, small-scale, solid-state metal joining process in which a thin flyer collides with a target, producing localized severe deformation and heating that could activate dynamic recrystallization (DRX). Although DRX has been studied in other high-strain-rate impact processes, its systematic investigation in LIW is limited. This work examines predicted DRX activity in LIW, factors leading to its occurrence, and the influence of the flyer and target surface roughness. DRX evaluation is important since microstructural refinements during impact ultimately affect the strength of the welded interface. An Eulerian numerical model is formulated to determine strain, strain rate, temperature, and related fields during LIW based on a Johnson–Cook flow stress model coupled to a Mie-Grüneisen equation of state to account for strain, temperature, and shock-pressure effects. DRX is evaluated via a postprocessing analysis based on the Zener–Hollomon parameter and Johnson–Mehl–Avrami–Kolmogorov relations. Two surface morphology interface conditions are examined, including idealized smooth flyer/target surfaces and experimentally measured rough surfaces. Results show that the rough flyer/target interfaces produce greater local deformation and temperature rise, leading to increased DRX and more refined grains. The temporal sensitivity to local strain and temperature variations highlights a limitation of postprocess DRX predictions and demonstrates a need for fully coupled microstructure simulation. This study lays the foundation for predicting and understanding DRX in LIW and suggests that surface morphology plays a critical role in the associated DRX behavior.
Zitieren
APA
Hossain, A. A., & Malik, A. S. (2026). Dynamic Recrystallization in Laser Impact Welding Driven by Surface Morphology. Journal of Manufacturing Science and Engineering, 148(8). https://doi.org/10.1115/1.4072053
Vancouver
Hossain AA, Malik AS. Dynamic Recrystallization in Laser Impact Welding Driven by Surface Morphology. Journal of Manufacturing Science and Engineering. 2026;148(8). doi:10.1115/1.4072053
BibTeX
@article{Hossain2026,
author = {Hossain, Al-Mustasin Abir and Malik, Arif S.},
title = {Dynamic Recrystallization in Laser Impact Welding Driven by Surface Morphology},
journal = {Journal of Manufacturing Science and Engineering},
year = {2026},
volume = {148},
number = {8},
doi = {10.1115/1.4072053}
}
EUVIMED