EUVIMEDEUVIMED entdecken
VergleichsstudieOpen Access · CC BY 4.0

Comparison of Two Different Finite Element Modeling Pipelines for Virtual Mechanical Testing of the Distal Third Metacarpal Bone in Thoroughbred Racehorses

Soroush Irandoust iD, Fatemeh Malekipour iD, R Christopher Whitton iD, Peter Muir iD, Peter Vee-Sin Lee iD, Corinne R Henak iD

Journal of Biomechanical Engineering · 01.08.2026 · 148 (8)

DOI: 10.1115/1.4071974 ↗

Kurz gefasst

Vergleichsstudie in der Zeitschrift Journal of Biomechanical Engineering, online erschienen am 08.06.2026. Verfasst von Soroush Irandoust und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Surgical Sciences, School of Veterinary Medicine, University of Wisconsin-Madison, Madison, WI 53706; Department of Mechanical Engineer…. Hauptthemen laut MEDLINE: Finite Element Analysis, Metacarpal Bones, Mechanical Tests, Materials Testing. Die Arbeit nennt 23 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Condylar stress fracture of the third metacarpal bone (MC3) in Thoroughbred racehorses is a common catastrophic injury, and identification of horses at heightened risk remains subjective. Standing computed tomography (sCT) is a practical screening tool that enables patient-specific finite element analysis (FEA) of the distal MC3 and prediction of subchondral bone strain, as a potential objective classifier of racehorses at heightened risk. The goal of this study was to compare two independently developed sCT-based subject-specific FEA pipelines for virtual mechanical testing of the distal MC3. One pipeline models the full three-dimensional (3D) distal MC3 (UWMSN), while the other uses a simpler approach by using single sCT slices (UMELB). Four (n = 4) MC3 condyles from four Thoroughbred racehorses were selected for the study. Models were generated using both pipelines, and the predicted subchondral bone strain was compared. UMELB predicted smaller subchondral strain compared to UWMSN, likely due to more limited modes of deformation. Although the UWMSN pipeline can identify elevated subchondral strain in horses with high fatigue damage, it is more labor-intensive and computationally expensive. With further tuning and validation, the UMELB pipeline could be used as a simpler and faster approach for the prediction of subchondral strain in the distal MC3.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Finite Element AnalysisMetacarpal BonesMechanical TestsMaterials TestingAnimalsHorsesStress, MechanicalBiomechanical PhenomenaTomography, X-Ray Computed

Stichwörter der Autor:innen

condylar stress fracturefinite element analysisthird metacarpal bonethoroughbred racehorses

Autor:innen und Institutionen

  • Department of Surgical Sciences, School of Veterinary Medicine, University of Wisconsin-Madison, Madison, WI 53706; Department of Mechanical Engineering, University of Wisconsin-Madison, Madison, WI 53706.
  • Department of Biomedical Engineering, University of Melbourne, Parkville, Victoria 3010, Australia.
  • The University of Melbourne.
  • Equine Centre, Melbourne Veterinary School, University of Melbourne, Werribee, Victoria 3030, Australia.
  • Department of Surgical Sciences, School of Veterinary Medicine, University of Wisconsin-Madison, Madison, WI 53706.
  • University of WisconsinMadison.

ORCID-Profile: Soroush Irandoust, Fatemeh Malekipour, R Christopher Whitton, Peter Muir, Peter Vee-Sin Lee, Corinne R Henak

Zitieren

APA

Irandoust, S., Malekipour, F., Whitton, R. C., Muir, P., Lee, P. V., & Henak, C. R. (2026). Comparison of Two Different Finite Element Modeling Pipelines for Virtual Mechanical Testing of the Distal Third Metacarpal Bone in Thoroughbred Racehorses. Journal of Biomechanical Engineering, 148(8). https://doi.org/10.1115/1.4071974

Vancouver

Irandoust S, Malekipour F, Whitton RC, Muir P, Lee PV, Henak CR. Comparison of Two Different Finite Element Modeling Pipelines for Virtual Mechanical Testing of the Distal Third Metacarpal Bone in Thoroughbred Racehorses. Journal of Biomechanical Engineering. 2026;148(8). doi:10.1115/1.4071974

BibTeX
@article{Irandoust2026,
  author = {Irandoust, Soroush and Malekipour, Fatemeh and Whitton, R Christopher and Muir, Peter and Lee, Peter Vee-Sin and Henak, Corinne R},
  title = {Comparison of Two Different Finite Element Modeling Pipelines for Virtual Mechanical Testing of the Distal Third Metacarpal Bone in Thoroughbred Racehorses},
  journal = {Journal of Biomechanical Engineering},
  year = {2026},
  volume = {148},
  number = {8},
  doi = {10.1115/1.4071974}
}
Kostenlos starten →