EUVIMEDEUVIMED entdecken
Crossref

Engineering Microstructure in Dry-Processed Cathodes Via Calendering

Hyunji Park, Congrui Jin, Steve Trask, Andrew Jansen, Jianlin Li

Journal of Manufacturing Science and Engineering · 01.10.2026 · 148 (10)

DOI: 10.1115/1.4071854 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Manufacturing Science and Engineering, online erschienen am 30.06.2026. Verfasst von Hyunji Park und 4 weiteren Autor:innen. Die Arbeit nennt 27 Literaturangaben. Gefördert von: Vehicle Technologies Program.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Calendering serves as a multifunctional step in dry electrode processing that not only densifies the electrode but also induces polytetrafluoroethylene (PTFE) fibrillation and reorganizes the microstructure. These coupled effects are essential for achieving electrical connectivity and sufficient cohesion, yet they also introduce trade-offs, such as active material particle fracture, pore collapse, and excessive porosity loss, that can hinder ionic transport. This research systematically maps the calendering parameter space for LiNi0.6Mn0.2Co0.2O2 (NMC622) dry cathodes with a target thickness of ∼100 µm and porosity of ∼30% by varying roll gaps, roll temperature, roll speed, and the number of passes. A practical processing window for this formulation and electrode architecture is identified that achieves sufficient PTFE fibrillation and strong interfacial contact while minimizing particle fracture and preserving the porosity required for efficient ionic transport. In particular, gradual-gap calendering with moderate per-pass compression mitigates fracture and pore collapse while still reaching the target thickness with reasonable throughput, and slower roll speeds with modest roll temperatures further reduce mechanical damage. These results provide actionable guidance for scaling NMC622-based thick dry-processed cathodes.

Förderung

  • Vehicle Technologies Program

Zitieren

APA

Park, H., Jin, C., Trask, S., Jansen, A., & Li, J. (2026). Engineering Microstructure in Dry-Processed Cathodes Via Calendering. Journal of Manufacturing Science and Engineering, 148(10). https://doi.org/10.1115/1.4071854

Vancouver

Park H, Jin C, Trask S, Jansen A, Li J. Engineering Microstructure in Dry-Processed Cathodes Via Calendering. Journal of Manufacturing Science and Engineering. 2026;148(10). doi:10.1115/1.4071854

BibTeX
@article{Park2026,
  author = {Park, Hyunji and Jin, Congrui and Trask, Steve and Jansen, Andrew and Li, Jianlin},
  title = {Engineering Microstructure in Dry-Processed Cathodes Via Calendering},
  journal = {Journal of Manufacturing Science and Engineering},
  year = {2026},
  volume = {148},
  number = {10},
  doi = {10.1115/1.4071854}
}
Kostenlos starten →