Mechanistic Model to Predict Forces in Bone End Milling: An Experimental Study Intended for Bone Grafting Surgery
Journal of Biomechanical Engineering · 01.06.2026 · 148 (6)
DOI: 10.1115/1.4071216 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Biomechanical Engineering, online erschienen am 18.03.2026. Verfasst von N A Jaseem Sajidh und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Indian Institute of Information Technology, Design and Manufacturing, Kancheepuram, Chennai, Tamil Nadu 600127,…. Hauptthemen laut MEDLINE: Bone Transplantation, Mechanical Phenomena, Models, Biological. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 45 Literaturangaben.
Abstract (Originalsprache)
In orthopedic surgery, subtractive manufacturing processes, such as drilling, sawing, grinding, and milling, are employed for implant placement, fracture fixation, and reconstruction surgery. If the forces resulting from the bone cutting processes are uncontrolled, mechanical damage (e.g., microcracks and bone fragmentations) is observed in the local host bone. In this study, the use of the end milling process for harvesting bone grafts was investigated. Importantly, the mechanistic model for the prediction of bone end milling forces was developed, considering the axial, tangential, and radial force components, geometry of the end milling cutter, and mechanical properties of the bone. First, an analytical description of the milling forces resulting from the end milling process was developed. Second, the cutting and edge force coefficients were calculated. Third, the axial, tangential, and radial forces resulting from the end mill cutter were predicted from the mechanistic model. To validate the end milling forces predicted from the mechanistic model, different sets of experiments were conducted. It was verified that the forces predicted from the mechanistic model agreed well with the validation experiments. The outcomes of this study can be used to pre-estimate the forces resulting from the end milling cutter, and therefore, mechanical damage can be avoided.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Mechanical Engineering, Indian Institute of Information Technology, Design and Manufacturing, Kancheepuram, Chennai, Tamil Nadu 600127, India.
- Indian Institute of Information Technology, Design and Manufacturing, Kancheepuram.
- Joint Department of Biomedical Engineering, University of North Carolina and North Carolina State University, Raleigh, NC 27695-7115.
- North Carolina State University.
ORCID-Profile: Ponnusamy Pandithevan
Zitieren
APA
Jaseem Sajidh, N. A., Pandithevan, P., & Narayan, R. J. (2026). Mechanistic Model to Predict Forces in Bone End Milling: An Experimental Study Intended for Bone Grafting Surgery. Journal of Biomechanical Engineering, 148(6). https://doi.org/10.1115/1.4071216
Vancouver
Jaseem Sajidh NA, Pandithevan P, Narayan RJ. Mechanistic Model to Predict Forces in Bone End Milling: An Experimental Study Intended for Bone Grafting Surgery. Journal of Biomechanical Engineering. 2026;148(6). doi:10.1115/1.4071216
BibTeX
@article{JaseemSajidh2026,
author = {Jaseem Sajidh, N A and Pandithevan, Ponnusamy and Narayan, Roger J},
title = {Mechanistic Model to Predict Forces in Bone End Milling: An Experimental Study Intended for Bone Grafting Surgery},
journal = {Journal of Biomechanical Engineering},
year = {2026},
volume = {148},
number = {6},
doi = {10.1115/1.4071216}
}
EUVIMED