Micro-Poro-Mechanical Modeling of the Lung Parenchyma: Theoretical Modeling and Parameters Identification
Journal of Biomechanical Engineering · 2026
DOI: 10.1115/1.4070036 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Biomechanical Engineering, 2026. Verfasst von Mahdi Manoochehrtayebi und 2 weiteren Autor:innen. Beteiligte Einrichtung: Laboratoire de Mécanique des Solides (LMS), École Polytechnique/IPP/CNRS, Équipe MΞDISIM, INRIA, Palaiseau 91120, France. Hauptthemen laut MEDLINE: Lung, Models, Biological, Mechanical Phenomena, Parenchymal Tissue. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 85 Literaturangaben. Gefördert von: Agence Nationale de la Recherche.
Abstract (Originalsprache)
Microporo-mechanical approaches can be employed to simulate the behavior of porous media, such as lung parenchyma, with respect to their microscopic morphological and mechanical features. In this work, we propose a general micromechanical framework to describe the behavior of a porous hyperelastic material in large strains, including surface tension, and adapt its parameters to reproduce lung parenchyma behavior. We illustrate the method on a two-dimensional (2D) periodic microstructure. The modeling framework is adaptable to any microstructure and any combination of stress, strain, and pressure loadings. The identification of the model parameters in the context of lung parenchyma, based on existing experimental morphological and pressure–volume data, is performed sequentially. Twelve parameters related to morphology, alveolar wall constitutive behavior, and surface tension are calibrated to reproduce pressure–volume curves in various conditions, for a porosity in the unloaded state set to Φf0=63%. The calibrated alveolar diameter is Dalv=54 μm. The identifiability of the Neo-Hookean and Ogden-Ciarlet-Geymonat hyperelastic potential parameters is studied; their values are β1=88.6 Pa, β2=11.0 Pa, β3=628 Pa, and α=3.41. The hysteretic response of lung to pressure is reproduced thanks to the formulation of a surface-dependent surface tension. This work paves the way for a better understanding of the relationship between microscopic features and the macroscopic response of lung, in healthy and pathological conditions. Further experimental investigations could help confirm the ranges of parameters obtained in this study.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Laboratoire de Mécanique des Solides (LMS), École Polytechnique/IPP/CNRS, Équipe MΞDISIM, INRIA, Palaiseau 91120, France.
- École Polytechnique.
- Universite de Lyon, University of Gustave Eiffel, Universite Claude Bernard Lyon 1, LBMC UMR T_9406, Lyon F-69622, France;INSA Lyon, CNRS, LaMCoS, UMR5259, Villeurbanne 69621, France.
- Université Gustave Eiffel.
ORCID-Profile: Martin Genet, Aline Bel-Brunon
Förderung
- Agence Nationale de la Recherche
Zitieren
APA
Manoochehrtayebi, M., Genet, M., & Bel-Brunon, A. (2026). Micro-Poro-Mechanical Modeling of the Lung Parenchyma: Theoretical Modeling and Parameters Identification. Journal of Biomechanical Engineering. https://doi.org/10.1115/1.4070036
Vancouver
Manoochehrtayebi M, Genet M, Bel-Brunon A. Micro-Poro-Mechanical Modeling of the Lung Parenchyma: Theoretical Modeling and Parameters Identification. Journal of Biomechanical Engineering. 2026. doi:10.1115/1.4070036
BibTeX
@article{Manoochehrtayebi2026,
author = {Manoochehrtayebi, Mahdi and Genet, Martin and Bel-Brunon, Aline},
title = {Micro-Poro-Mechanical Modeling of the Lung Parenchyma: Theoretical Modeling and Parameters Identification},
journal = {Journal of Biomechanical Engineering},
year = {2026},
doi = {10.1115/1.4070036}
}
EUVIMED