EUVIMEDEUVIMED entdecken
Crossref

Machine Vision Based On-Board Diagnostics Model to Characterize Surface Degradation of Turbomachinery Components

Thennavarajan S, Dilipkumar Bhanudasji Alone, AbdulGafoor C. P., N. R. Vadlamani, Arunachalam N.

Journal of Nondestructive Evaluation, Diagnostics and Prognostics of Engineering Systems · 01.05.2026 · 9 (2)

DOI: 10.1115/1.4071042 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Nondestructive Evaluation, Diagnostics and Prognostics of Engineering Systems, online erschienen am 17.03.2026. Verfasst von Thennavarajan S und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 79 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This article proposes a novel machine vision (MV)-based technique to assess surface roughness (Ra) as an online diagnostic and monitoring system tool. Such a tool helps reduce operational downtime and minimize human intervention. The proposed method involves image acquisition in a controlled environment, detection of surface features through a parameter called “edge frequency” using the edge detection algorithms (EDAs), and developing a correlation between the estimated edge frequency and the experimentally measured Ra. Several well-known EDAs are evaluated on different samples, including emery papers with various grit values and turbomachinery blades. The superiority of Laplacian of Gaussian (LoG)-based EDA in terms of its resilience to noise and computational benefit is demonstrated. The edge frequency–Ra correlation is subsequently used to predict the Ra value of different sets to demonstrate prediction accuracy. Compared to contact-based measurements, the predictions on the emery samples are within 4.8%, while those on the blade samples are within 5.9%. Finally, the established correlation is used for the online diagnosis of a legacy axial compressor under cleaned and fouled conditions. The predicted Ra values for the samples and the trends agree with the historical data reported by the original equipment manufacturers (OEMs), demonstrating its ability as an on-board diagnostic (OBD) tool.

Zitieren

APA

S, T., Alone, D. B., P., A. C., Vadlamani, N. R., & N., A. (2026). Machine Vision Based On-Board Diagnostics Model to Characterize Surface Degradation of Turbomachinery Components. Journal of Nondestructive Evaluation, Diagnostics and Prognostics of Engineering Systems, 9(2). https://doi.org/10.1115/1.4071042

Vancouver

S T, Alone DB, P. AC, Vadlamani NR, N. A. Machine Vision Based On-Board Diagnostics Model to Characterize Surface Degradation of Turbomachinery Components. Journal of Nondestructive Evaluation, Diagnostics and Prognostics of Engineering Systems. 2026;9(2). doi:10.1115/1.4071042

BibTeX
@article{S2026,
  author = {S, Thennavarajan and Alone, Dilipkumar Bhanudasji and P., AbdulGafoor C. and Vadlamani, N. R. and N., Arunachalam},
  title = {Machine Vision Based On-Board Diagnostics Model to Characterize Surface Degradation of Turbomachinery Components},
  journal = {Journal of Nondestructive Evaluation, Diagnostics and Prognostics of Engineering Systems},
  year = {2026},
  volume = {9},
  number = {2},
  doi = {10.1115/1.4071042}
}
Kostenlos starten →