Compressor Stator Leading Edge Instrumentation
Journal of Turbomachinery · 01.07.2026 · 148 (7)
DOI: 10.1115/1.4070235 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Turbomachinery, online erschienen am 07.09.2026. Verfasst von Tolga Yasa und 3 weiteren Autor:innen. Die Arbeit nennt 18 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Leading edge instrumentation is commonly used for performance measurement in high-speed multi-stage compressor or whole engine testing. Due to spatial constraints and calibration requirements, it is infeasible to use the more accurate methods of a roving multi-hole probe or multi-headed rakes. In this work, the parasitic losses and measurement accuracy of both Kiel shrouded and bare Pitot probes are studied on the leading edge of a compressor stator. The tradeoff between these two quantities with four different relative sizes of probe is measured in a single-stage experimental compressor rig and supported with numerical calculations. Several comparisons are made to help guide an instrumentation designer to select the best instrumentation for their machines: whether the leadouts can be routed on the pressure side of the blade or should be internal to the geometry; the design of the intake of the Kiel shroud itself; and whether or not a Kiel shroud is even needed in a compressor application. In each case, the effect on the local operating point of the stage is examined as well as the detailed flow physics on the instrumented blade itself.
Zitieren
APA
Yasa, T., Sakthivel, T., Romanenko, K., & Taylor, J. V. (2026). Compressor Stator Leading Edge Instrumentation. Journal of Turbomachinery, 148(7). https://doi.org/10.1115/1.4070235
Vancouver
Yasa T, Sakthivel T, Romanenko K, Taylor JV. Compressor Stator Leading Edge Instrumentation. Journal of Turbomachinery. 2026;148(7). doi:10.1115/1.4070235
BibTeX
@article{Yasa2026,
author = {Yasa, Tolga and Sakthivel, Thenuga and Romanenko, Kirill and Taylor, James V.},
title = {Compressor Stator Leading Edge Instrumentation},
journal = {Journal of Turbomachinery},
year = {2026},
volume = {148},
number = {7},
doi = {10.1115/1.4070235}
}
EUVIMED