EUVIMEDEUVIMED entdecken
Crossref

Optimum Push-Off for Uneven Walking Based on the Just-In-Time Strategy: Walking With Interrupted Push-Off Is Mechanically Costly

Seyed-Saleh Hosseini-Yazdi, John Ea Bertram iD

Journal of Biomechanical Engineering · 2025

DOI: 10.1115/1.4069666 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Biomechanical Engineering, 2025. Verfasst von Seyed-Saleh Hosseini-Yazdi und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Biomedical Engineering, Schulich School of Engineering, University of Calgary, Calgary, AB T2N 1N4, Canada; Human Performance Laborator…. Hauptthemen laut MEDLINE: Walking, Mechanical Phenomena. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 67 Literaturangaben. Gefördert von: Natural Sciences and Engineering Research Council of Canada.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

We examine the limits of push-off, and we explore when alternate joint actuation might replace it. Using a powered simple walking model (point mass with rigid massless legs), the optimal analytical push-off was derived based on walking speed and step elevation changes. It was observed that higher speeds increased the available push-off to attain greater step-up, e.g., a walker at 1.4 m/s could manage a step-up amplitude of Δh = 0.106 m with a push-off only. Step-up amplitude also required a minimum walking speed for the required push-off. When poststep transition energy compensation was necessary, delayed push-off exerted along the trailing leg led to some wasted work. Walking over smooth surfaces, the delayed push-off cost was up to 7.5 times higher than the optimal push-off, whereas hip-driven compensation was lower at 3.2 times the optimal work. A similar pattern was also observed for step-ups. Our simulation results match young adult walking when terrain view was unrestricted. We utilized available empirical data to quantify the incremental energetic cost of disrupted push-off. It showed that the frequency and poststep transition compensation costs were comparable. As step length further decreased, the cost of poststep transition compensation rose more rapidly, possibly defining a lower limit for step length. The poststep transition compensation rose by 0.18 W/kg/%ΔHz in young adults and 0.2 W/kg/%ΔHz in older adults. Additionally, visual constraints amplified the cost by 0.05 W/kg/%ΔHz.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

WalkingMechanical PhenomenaHumansBiomechanical PhenomenaTime FactorsAdultYoung AdultModels, BiologicalMale

Stichwörter der Autor:innen

energy efficiencygait modulationpreemptive push-offstep-to-step transitionuneven walking

Autor:innen und Institutionen

  • Department of Biomedical Engineering, Schulich School of Engineering, University of Calgary, Calgary, AB T2N 1N4, Canada; Human Performance Laboratory, Faculty of Kinesiology, University of Calgary, Calgary, AB T2N 1N4,…
  • Department of Biomedical Engineering, Schulich School of Engineering, University of Calgary, Calgary, AB T2N1N4, Canada; Cumming School of Medicine, University of Calgary, Calgary, AB T2N 4N1, Canada.
  • University of Calgary.

ORCID-Profile: John Ea Bertram

Förderung

  • Natural Sciences and Engineering Research Council of Canada

Zitieren

APA

Hosseini-Yazdi, S. S., & Bertram, J. E. (2025). Optimum Push-Off for Uneven Walking Based on the Just-In-Time Strategy: Walking With Interrupted Push-Off Is Mechanically Costly. Journal of Biomechanical Engineering. https://doi.org/10.1115/1.4069666

Vancouver

Hosseini-Yazdi SS, Bertram JE. Optimum Push-Off for Uneven Walking Based on the Just-In-Time Strategy: Walking With Interrupted Push-Off Is Mechanically Costly. Journal of Biomechanical Engineering. 2025. doi:10.1115/1.4069666

BibTeX
@article{HosseiniYazdi2025,
  author = {Hosseini-Yazdi, Seyed-Saleh and Bertram, John Ea},
  title = {Optimum Push-Off for Uneven Walking Based on the Just-In-Time Strategy: Walking With Interrupted Push-Off Is Mechanically Costly},
  journal = {Journal of Biomechanical Engineering},
  year = {2025},
  doi = {10.1115/1.4069666}
}
Kostenlos starten →