EUVIMEDEUVIMED entdecken
Crossref

Characterization of Flow Structure and Wall Shear Stress in Patient-Specific Abdominal Aortic Aneurysm Phantom Using Particle Image Velocimetry

Mehmet Anıl Susar, Oğuzhan Yılmaz, Amirhossein Fathipour, Onur Mutlu, Noaman Mazhar, Ayman El-Menyar, Hassan Al-Thani, Hüseyin Çağatay Yalçın, Mehmet Metin Yavuz iD

Journal of Biomechanical Engineering · 2025

DOI: 10.1115/1.4069296 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Biomechanical Engineering, 2025. Verfasst von Mehmet Anıl Susar und 8 weiteren Autor:innen. Beteiligte Einrichtung: Mechanical Engineering Department, Middle East Technical University, Ankara 06800, Türkiye. Hauptthemen laut MEDLINE: Aortic Aneurysm, Abdominal, Stress, Mechanical, Rheology, Phantoms, Imaging. Die Arbeit nennt 32 Literaturangaben. Gefördert von: Qatar University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Abdominal aortic aneurysm (AAA) is an irreversible dilation of the abdominal aorta that carries a significant risk of rupture if not adequately screened and treated. This condition poses a severe threat, with a mortality rate exceeding 80% in certain age groups. The enlargement of the abdominal aorta leads to notable hemodynamic alterations in AAAs, characterized by flow separation and vortical structures. Current understanding acknowledges a correlation between the growth and rupture mechanisms of AAA and the disturbed hemodynamics, emphasizing metrics such as time-averaged wall shear stress (TAWSS), oscillatory shear index (OSI), endothelial cell activation potential (ECAP), and relative residence time (RRT). In this study, we utilized a quantitative velocity measurement technique, particle image velocimetry (PIV), to characterize the flow structure and wall shear stress in a patient-specific aneurysmal abdominal aorta phantom. AAA phantoms generated from patient computed tomography (CT) images were used. Phase-averaged flow fields for 12 phases of physiological flow were investigated, and velocity contours, streamline patterns, and swirling strength contours were constructed in the AAA at three different PIV planes. A method previously developed and validated to extract wall shear stress from PIV measurements is applied to obtain shear stress indexes, including TAWSS, OSI, ECAP, and RRT. In addition, to link our findings with the clinical rupture risk, actual rupture location in the CT images of the aneurysm sac for the studied case was compared with the flow structure and shear stress distributions obtained from PIV measurements. The progression of vortex structures in the bulge along with the flow separation and reattachment zones in relation to the shear stress indexes are presented and discussed in detail. When flow dynamics in actual rupture location is analyzed, there is a high level of flow disturbance characterized by flow circulation, low TAWSS, and high OSI, ECAP, and RRT, consistent with previous studies. Here, we present a PIV-based flow examination through patient-specific phantom, which will contribute to experimental investigations for understanding the influence of disturbed hemodynamics on AAA biomechanics.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Aortic Aneurysm, AbdominalStress, MechanicalRheologyPhantoms, ImagingShear StrengthHumans

Stichwörter der Autor:innen

ECAPOSIRRTTAWSSabdominal aortic aneurysmdisturbed hemodynamicsparticle image velocimetry (PIV)patient-specific modelshear stress indexesswirling strengthwall shear stress (WSS)

Autor:innen und Institutionen

  • Mechanical Engineering Department, Middle East Technical University, Ankara 06800, Türkiye.
  • Middle East Technical University.
  • von Karman Institute for Fluid Dynamics, Chaussée de Waterloo 72, Rhode-St-Genèse 1640, Belgium.
  • Von Karman Institute for Fluid Dynamics.
  • Mechanical Engineering Department, University of Windsor, Windsor, ON N9B3P4, Canada.
  • University of Windsor.

ORCID-Profile: Mehmet Metin Yavuz

Förderung

  • Qatar University

Zitieren

APA

Susar, M. A., Yılmaz, O., Fathipour, A., Mutlu, O., Mazhar, N., El-Menyar, A., Al-Thani, H., Yalçın, H. Ç., & Yavuz, M. M. (2025). Characterization of Flow Structure and Wall Shear Stress in Patient-Specific Abdominal Aortic Aneurysm Phantom Using Particle Image Velocimetry. Journal of Biomechanical Engineering. https://doi.org/10.1115/1.4069296

Vancouver

Susar MA, Yılmaz O, Fathipour A, Mutlu O, Mazhar N, El-Menyar A, et al. Characterization of Flow Structure and Wall Shear Stress in Patient-Specific Abdominal Aortic Aneurysm Phantom Using Particle Image Velocimetry. Journal of Biomechanical Engineering. 2025. doi:10.1115/1.4069296

BibTeX
@article{Susar2025,
  author = {Susar, Mehmet Anıl and Yılmaz, Oğuzhan and Fathipour, Amirhossein and Mutlu, Onur and Mazhar, Noaman and El-Menyar, Ayman and Al-Thani, Hassan and Yalçın, Hüseyin Çağatay and Yavuz, Mehmet Metin},
  title = {Characterization of Flow Structure and Wall Shear Stress in Patient-Specific Abdominal Aortic Aneurysm Phantom Using Particle Image Velocimetry},
  journal = {Journal of Biomechanical Engineering},
  year = {2025},
  doi = {10.1115/1.4069296}
}
Kostenlos starten →