Bubble Nucleation Pulse-Width in Thermal Inkjet Actuators
ASME Journal of Heat and Mass Transfer · 01.08.2025 · 147 (8)
DOI: 10.1115/1.4068607 ↗Kurz gefasst
Fachartikel in der Zeitschrift ASME Journal of Heat and Mass Transfer, online erschienen am 21.05.2025. Verfasst von S. G. Mallinson und 8 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 100 Literaturangaben.
Abstract (Originalsprache)
Thermal inkjet actuators operate by passing a current through an electrical resistor, the heater, in contact with a working liquid such as ink. This heats the liquid rapidly (dT/dt≈108−109 K/s), and once the liquid temperature exceeds the superheat limit, it flash-boils. The resultant high temperature (≈300 °C) and pressure (≈10 MPa) bubble expands, forcing the ink through a nozzle, forming a droplet which then travels through the print gap until it strikes the media. Here, we discuss the bubble nucleation criterion for thermal inkjet technology, using numerical and analytical models. The results from the different models, and data from bubble visualization and droplet weight experiments, are within approximately 10% of each other. The experimental data provide a useful benchmark for comparison against other theoretical models. The newly derived analytical model provides a simple method for the thermal inkjet designer to estimate the bubble nucleation pulse-width and the energy required for nucleation.
Zitieren
APA
Mallinson, S. G., McBain, G. D., Horrocks, G. D., North, A. J., Lakshmi, C. S., Starke, T. H. K., Lowe, G. W., Barton, C. S., & Myers, S. (2025). Bubble Nucleation Pulse-Width in Thermal Inkjet Actuators. ASME Journal of Heat and Mass Transfer, 147(8). https://doi.org/10.1115/1.4068607
Vancouver
Mallinson SG, McBain GD, Horrocks GD, North AJ, Lakshmi CS, Starke THK, et al. Bubble Nucleation Pulse-Width in Thermal Inkjet Actuators. ASME Journal of Heat and Mass Transfer. 2025;147(8). doi:10.1115/1.4068607
BibTeX
@article{Mallinson2025,
author = {Mallinson, S. G. and McBain, G. D. and Horrocks, G. D. and North, A. J. and Lakshmi, C. S. and Starke, T. H. K. and Lowe, G. W. and Barton, C. S. and Myers, S.},
title = {Bubble Nucleation Pulse-Width in Thermal Inkjet Actuators},
journal = {ASME Journal of Heat and Mass Transfer},
year = {2025},
volume = {147},
number = {8},
doi = {10.1115/1.4068607}
}
EUVIMED